lkml.org 
[lkml]   [2019]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] usb: dwc3: Add avoiding vbus glitch happen during xhci reset
On Tue, 19 Feb 2019 07:23:14 +0000, Ran Wang wrote:
> When DWC3 is set to host mode by programming register DWC3_GCTL, VBUS
> (or its control signal) will turn on immediately on related Root Hub
> ports. Then the VBUS will be de-asserted for a little while during xhci
> reset (conducted by xhci driver) for a little while and back to normal.
>
> This VBUS glitch might cause some USB devices emuration fail if kernel
> boot with them connected. One SW workaround which can fix this is to
> program all PORTSC[PP] to 0 to turn off VBUS immediately after setting
> host mode in DWC3 driver(per signal measurement result, it will be too
> late to do it in xhci-plat.c or xhci.c).
>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
> Changes in v2:
> - Correct typos
> - Shorten the name to snps,host-vbus-glitches
>
> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2019-02-22 21:37    [W:0.077 / U:0.156 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site