lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq channel
Date
On i.MX8QXP, SCU uses MU1 general interrupt channel #3 to notify
user for IRQs of RTC alarm, thermal alarm and WDOG etc., mailbox
RX doorbell mode is used for this function, this patch adds
support for it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V3:
- rename "gi3" to "gip3";
- add alias for getting mu id by driver.
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 4c3dd95..f0a9224 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -21,6 +21,7 @@
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &adma_lpuart0;
+ mu1 = &lsio_mu1;
};

cpus {
@@ -87,7 +88,8 @@
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3";
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
&lsio_mu1 0 2
@@ -95,7 +97,8 @@
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;

clk: clock-controller {
compatible = "fsl,imx8qxp-clk";
--
2.7.4
\
 
 \ /
  Last update: 2019-02-21 10:20    [W:0.073 / U:1.976 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site