lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] media: imx: csi: Allow unknown nearest upstream entities
Date
On i.MX6, the nearest upstream entity to the CSI can only be the
CSI video muxes or the Synopsys DW MIPI CSI-2 receiver.

However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver.
So allow for the nearest upstream entity to the CSI to be something
other than those.

Fixes: bf3cfaa712e5c ("media: staging/imx: get CSI bus type from nearest
upstream entity")

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
---
drivers/staging/media/imx/imx-media-csi.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 3b7517348666..41965d8b56c4 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -154,9 +154,10 @@ static inline bool requires_passthrough(struct v4l2_fwnode_endpoint *ep,
/*
* Parses the fwnode endpoint from the source pad of the entity
* connected to this CSI. This will either be the entity directly
- * upstream from the CSI-2 receiver, or directly upstream from the
- * video mux. The endpoint is needed to determine the bus type and
- * bus config coming into the CSI.
+ * upstream from the CSI-2 receiver, directly upstream from the
+ * video mux, or directly upstream from the CSI itself. The endpoint
+ * is needed to determine the bus type and bus config coming into
+ * the CSI.
*/
static int csi_get_upstream_endpoint(struct csi_priv *priv,
struct v4l2_fwnode_endpoint *ep)
@@ -172,7 +173,8 @@ static int csi_get_upstream_endpoint(struct csi_priv *priv,
if (!priv->src_sd)
return -EPIPE;

- src = &priv->src_sd->entity;
+ sd = priv->src_sd;
+ src = &sd->entity;

if (src->function == MEDIA_ENT_F_VID_MUX) {
/*
@@ -186,6 +188,14 @@ static int csi_get_upstream_endpoint(struct csi_priv *priv,
src = &sd->entity;
}

+ /*
+ * If the source is neither the video mux nor the CSI-2 receiver,
+ * get the source pad directly upstream from CSI itself.
+ */
+ if (src->function != MEDIA_ENT_F_VID_MUX &&
+ sd->grp_id != IMX_MEDIA_GRP_ID_CSI2)
+ src = &priv->sd.entity;
+
/* get source pad of entity directly upstream from src */
pad = imx_media_find_upstream_pad(priv->md, src, 0);
if (IS_ERR(pad))
--
2.17.1
\
 
 \ /
  Last update: 2019-02-21 00:55    [W:0.032 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site