lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] soc: imx: gpcv2: Make use of regmap_read_poll_timeout()
Date
Replace explicit polling loop with a call to
regmap_read_poll_timeout() to avoid code repetition. Also fix
misspelled "failed" while at it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/soc/imx/gpcv2.c | 39 ++++++++++++++-------------------------
1 file changed, 14 insertions(+), 25 deletions(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 176f473127b6..e06bf12a1e4b 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -136,8 +136,8 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
GPC_PU_PGC_SW_PUP_REQ : GPC_PU_PGC_SW_PDN_REQ;
const bool enable_power_control = !on;
const bool has_regulator = !IS_ERR(domain->regulator);
- unsigned long deadline;
int i, ret = 0;
+ u32 pxx_req;

regmap_update_bits(domain->regmap, GPC_PGC_CPU_MAPPING,
domain->bits.map, domain->bits.map);
@@ -169,30 +169,19 @@ static int imx_gpc_pu_pgc_sw_pxx_req(struct generic_pm_domain *genpd,
* As per "5.5.9.4 Example Code 4" in IMX7DRM.pdf wait
* for PUP_REQ/PDN_REQ bit to be cleared
*/
- deadline = jiffies + msecs_to_jiffies(1);
- while (true) {
- u32 pxx_req;
-
- regmap_read(domain->regmap, offset, &pxx_req);
-
- if (!(pxx_req & domain->bits.pxx))
- break;
-
- if (time_after(jiffies, deadline)) {
- dev_err(domain->dev, "falied to command PGC\n");
- ret = -ETIMEDOUT;
- /*
- * If we were in a process of enabling a
- * domain and failed we might as well disable
- * the regulator we just enabled. And if it
- * was the opposite situation and we failed to
- * power down -- keep the regulator on
- */
- on = !on;
- break;
- }
-
- cpu_relax();
+ ret = regmap_read_poll_timeout(domain->regmap, offset, pxx_req,
+ !(pxx_req & domain->bits.pxx),
+ 0, USEC_PER_MSEC);
+ if (ret) {
+ dev_err(domain->dev, "failed to command PGC\n");
+ /*
+ * If we were in a process of enabling a
+ * domain and failed we might as well disable
+ * the regulator we just enabled. And if it
+ * was the opposite situation and we failed to
+ * power down -- keep the regulator on
+ */
+ on = !on;
}

if (enable_power_control)
--
2.20.1
\
 
 \ /
  Last update: 2019-02-20 03:15    [W:0.040 / U:10.980 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site