lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 21/24] drivers: thermal: tsens: Add generic support for TSENS v1 IP
On Thu, Feb 07, 2019 at 04:19:39PM +0530, Amit Kucheria wrote:
> qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4
> of the TSENS IP, functionality for which is encapsulated inside the
> qcom,tsens-v1 compatible.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> drivers/thermal/qcom/Makefile | 4 +-
> drivers/thermal/qcom/tsens-v1.c | 229 ++++++++++++++++++++++++++++++++
> drivers/thermal/qcom/tsens.c | 3 +
> drivers/thermal/qcom/tsens.h | 3 +
> 4 files changed, 238 insertions(+), 1 deletion(-)
> create mode 100644 drivers/thermal/qcom/tsens-v1.c
>
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 7fa3cadce760..fc6fe50cdde4 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,3 +1,5 @@
> obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
> -qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o tsens-8960.o tsens-v2.o
> +
> +qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \
> + tsens-8960.o tsens-v2.o tsens-v1.o
> obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> new file mode 100644
> index 000000000000..417e2c2de1a1
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -0,0 +1,229 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019, Linaro Limited
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/regmap.h>
> +#include <linux/delay.h>
> +#include "tsens.h"
> +
> +/* ----- SROT ------ */
> +#define SROT_HW_VER_OFF 0x0000
> +#define SROT_CTRL_OFF 0x0004
> +
> +/* ----- TM ------ */
> +#define TM_INT_EN_OFF 0x0000
> +#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004
> +#define TM_Sn_STATUS_OFF 0x0044
> +#define TM_TRDY_OFF 0x0084
> +
> +/* eeprom layout data for qcs404/405 (v1) */
> +#define BASE0_MASK 0x000007f8
> +#define BASE1_MASK 0x0007f800
> +#define BASE0_SHIFT 3
> +#define BASE1_SHIFT 11
> +
> +#define S0_P1_MASK 0x0000003f
> +#define S1_P1_MASK 0x0003f000
> +#define S2_P1_MASK 0x3f000000
> +#define S3_P1_MASK 0x000003f0
> +#define S4_P1_MASK 0x003f0000
> +#define S5_P1_MASK 0x0000003f
> +#define S6_P1_MASK 0x0003f000
> +#define S7_P1_MASK 0x3f000000
> +#define S8_P1_MASK 0x000003f0
> +#define S9_P1_MASK 0x003f0000
> +
> +#define S0_P2_MASK 0x00000fc0
> +#define S1_P2_MASK 0x00fc0000
> +#define S2_P2_MASK_1_0 0xc0000000
> +#define S2_P2_MASK_5_2 0x0000000f
> +#define S3_P2_MASK 0x0000fc00
> +#define S4_P2_MASK 0x0fc00000
> +#define S5_P2_MASK 0x00000fc0
> +#define S6_P2_MASK 0x00fc0000
> +#define S7_P2_MASK_1_0 0xc0000000
> +#define S7_P2_MASK_5_2 0x0000000f
> +#define S8_P2_MASK 0x0000fc00
> +#define S9_P2_MASK 0x0fc00000
> +
> +#define S0_P1_SHIFT 0
> +#define S0_P2_SHIFT 6
> +#define S1_P1_SHIFT 12
> +#define S1_P2_SHIFT 18
> +#define S2_P1_SHIFT 24
> +#define S2_P2_SHIFT_1_0 30
> +
> +#define S2_P2_SHIFT_5_2 0
> +#define S3_P1_SHIFT 4
> +#define S3_P2_SHIFT 10
> +#define S4_P1_SHIFT 16
> +#define S4_P2_SHIFT 22
> +
> +#define S5_P1_SHIFT 0
> +#define S5_P2_SHIFT 6
> +#define S6_P1_SHIFT 12
> +#define S6_P2_SHIFT 18
> +#define S7_P1_SHIFT 24
> +#define S7_P2_SHIFT_1_0 30
> +
> +#define S7_P2_SHIFT_5_2 0
> +#define S8_P1_SHIFT 4
> +#define S8_P2_SHIFT 10
> +#define S9_P1_SHIFT 16
> +#define S9_P2_SHIFT 22
> +
> +#define CAL_SEL_MASK 7

Why not using the macros on bits.h?

> +#define CAL_SEL_SHIFT 0
> +
> +static int calibrate_v1(struct tsens_priv *priv)
> +{
> + u32 base0 = 0, base1 = 0;
> + u32 p1[10], p2[10];
> + u32 mode = 0, lsb = 0, msb = 0;
> + u32 *qfprom_cdata;
> + int i;
> +
> + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
> + if (IS_ERR(qfprom_cdata))
> + return PTR_ERR(qfprom_cdata);
> +
> + mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
> + dev_dbg(priv->dev, "calibration mode is %d\n", mode);
> +
> + switch (mode) {
> + case TWO_PT_CALIB:
> + base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT;
> + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
> + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
> + /* This value is split over two registers, 2 bits and 4 bits */
> + lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0;
> + msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2;
> + p2[2] = msb << 2 | lsb;
> + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
> + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
> + p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT;
> + p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT;
> + /* This value is split over two registers, 2 bits and 4 bits */
> + lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0;
> + msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2;
> + p2[7] = msb << 2 | lsb;
> + p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT;
> + p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
> + for (i = 0; i < priv->num_sensors; i++)
> + p2[i] = ((base1 + p2[i]) << 2);
> + /* Fall through */
> + case ONE_PT_CALIB2:
> + base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
> + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
> + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
> + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
> + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
> + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
> + p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT;
> + p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT;
> + p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT;
> + p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT;
> + p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT;
> + for (i = 0; i < priv->num_sensors; i++)
> + p1[i] = (((base0) + p1[i]) << 2);
> + break;
> + default:
> + for (i = 0; i < priv->num_sensors; i++) {
> + p1[i] = 500;
> + p2[i] = 780;
> + }
> + break;
> + }
> +
> + compute_intercept_slope(priv, p1, p2, mode);
> +
> + return 0;
> +}
> +
> +/* v1.x: qcs404,405 */
> +
> +const struct tsens_features tsens_v1_feat = {
> + .ver_info = 1,
> + .crit_int = 0,
> + .adc = 1,
> + .srot_split = 1,
> + .max_sensors = 11,
> +};
> +
> +const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
> + /* ----- SROT ------ */
> + /* VERSION */
> + [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31),
> + [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27),
> + [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15),
> + /* CTRL_OFFSET */
> + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0),
> + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1),
> + [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13),
> +
> + /* ----- TM ------ */
> + /* UPPER_LOWER_INTERRUPT_CTRL */
> + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0),
> + /* Sn_UPPER_LOWER_STATUS_CTRL */
> + REG_BANK(LOW_THRESH, 0, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9),
> + REG_BANK(LOW_THRESH, 1, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 4, 0, 9),
> + REG_BANK(LOW_THRESH, 2, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 8, 0, 9),
> + REG_BANK(LOW_THRESH, 3, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 12, 0, 9),
> + REG_BANK(LOW_THRESH, 4, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 16, 0, 9),
> + REG_BANK(LOW_THRESH, 5, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 20, 0, 9),
> + REG_BANK(LOW_THRESH, 6, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 24, 0, 9),
> + REG_BANK(LOW_THRESH, 7, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 28, 0, 9),
> + REG_BANK(LOW_THRESH, 8, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 32, 0, 9),
> + REG_BANK(LOW_THRESH, 9, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 36, 0, 9),
> + REG_BANK(LOW_THRESH, 10, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 40, 0, 9),
> + REG_BANK(UP_THRESH, 0, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19),
> + REG_BANK(UP_THRESH, 1, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 4, 10, 19),
> + REG_BANK(UP_THRESH, 2, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 8, 10, 19),
> + REG_BANK(UP_THRESH, 3, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 12, 10, 19),
> + REG_BANK(UP_THRESH, 4, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 16, 10, 19),
> + REG_BANK(UP_THRESH, 5, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 20, 10, 19),
> + REG_BANK(UP_THRESH, 6, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 24, 10, 19),
> + REG_BANK(UP_THRESH, 7, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 28, 10, 19),
> + REG_BANK(UP_THRESH, 8, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 32, 10, 19),
> + REG_BANK(UP_THRESH, 9, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 36, 10, 19),
> + REG_BANK(UP_THRESH, 10, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF + 40, 10, 19),
> + /* Sn_STATUS */
> + REG_BANK(LAST_TEMP, 0, TM_Sn_STATUS_OFF, 0, 9),
> + REG_BANK(LAST_TEMP, 1, TM_Sn_STATUS_OFF + 4, 0, 9),
> + REG_BANK(LAST_TEMP, 2, TM_Sn_STATUS_OFF + 8, 0, 9),
> + REG_BANK(LAST_TEMP, 3, TM_Sn_STATUS_OFF + 12, 0, 9),
> + REG_BANK(LAST_TEMP, 4, TM_Sn_STATUS_OFF + 16, 0, 9),
> + REG_BANK(LAST_TEMP, 5, TM_Sn_STATUS_OFF + 20, 0, 9),
> + REG_BANK(LAST_TEMP, 6, TM_Sn_STATUS_OFF + 24, 0, 9),
> + REG_BANK(LAST_TEMP, 7, TM_Sn_STATUS_OFF + 28, 0, 9),
> + REG_BANK(LAST_TEMP, 8, TM_Sn_STATUS_OFF + 32, 0, 9),
> + REG_BANK(LAST_TEMP, 9, TM_Sn_STATUS_OFF + 36, 0, 9),
> + REG_BANK(LAST_TEMP, 10, TM_Sn_STATUS_OFF + 40, 0, 9),
> + REG_BANK(VALID, 0, TM_Sn_STATUS_OFF, 14, 14),
> + REG_BANK(VALID, 1, TM_Sn_STATUS_OFF + 4, 14, 14),
> + REG_BANK(VALID, 2, TM_Sn_STATUS_OFF + 8, 14, 14),
> + REG_BANK(VALID, 3, TM_Sn_STATUS_OFF + 12, 14, 14),
> + REG_BANK(VALID, 4, TM_Sn_STATUS_OFF + 16, 14, 14),
> + REG_BANK(VALID, 5, TM_Sn_STATUS_OFF + 20, 14, 14),
> + REG_BANK(VALID, 6, TM_Sn_STATUS_OFF + 24, 14, 14),
> + REG_BANK(VALID, 7, TM_Sn_STATUS_OFF + 28, 14, 14),
> + REG_BANK(VALID, 8, TM_Sn_STATUS_OFF + 32, 14, 14),
> + REG_BANK(VALID, 9, TM_Sn_STATUS_OFF + 36, 14, 14),
> + REG_BANK(VALID, 10, TM_Sn_STATUS_OFF + 40, 14, 14),
> + /* TRDY */
> + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
> +};
> +
> +static const struct tsens_ops ops_generic_v1 = {
> + .init = init_common,
> + .calibrate = calibrate_v1,
> + .get_temp = get_temp_tsens_valid,
> +};
> +
> +const struct tsens_plat_data data_tsens_v1 = {
> + .ops = &ops_generic_v1,
> + .feat = &tsens_v1_feat,
> + .fields = tsens_v1_regfields,
> +};
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index fc44cac31fa5..36b0b52db524 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -63,6 +63,9 @@ static const struct of_device_id tsens_table[] = {
> }, {
> .compatible = "qcom,msm8996-tsens",
> .data = &data_8996,
> + }, {
> + .compatible = "qcom,tsens-v1",
> + .data = &data_tsens_v1,
> }, {
> .compatible = "qcom,tsens-v2",
> .data = &data_tsens_v2,
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 4b3d71b26c97..4ed07e607cbc 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -265,6 +265,9 @@ extern const struct tsens_plat_data data_8960;
> /* TSENS v0.1 targets */
> extern const struct tsens_plat_data data_8916, data_8974;
>
> +/* TSENS v1 targets */
> +extern const struct tsens_plat_data data_tsens_v1;
> +
> /* TSENS v2 targets */
> extern const struct tsens_plat_data data_8996, data_tsens_v2;
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-02-20 02:13    [W:0.122 / U:2.392 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site