Messages in this thread Patch in this message | | | From | "Ghannam, Yazen" <> | Subject | [PATCH 2/5] EDAC/amd64: Support more than two UMCs | Date | Tue, 19 Feb 2019 20:25:53 +0000 |
| |
From: Yazen Ghannam <yazen.ghannam@amd.com>
The first few models of Family 17h all had 2 UMCs per Die, so we treated this as a fixed value. However, future systems may have more UMCs per Die.
Related to this, we were finding the channel number and base address of a UMC by matching on fixed, known values. However, a pattern has emerged so we no longer need to match on hardcoded values.
Set the number of UMCs at init time based on the Family/Model. Also, update the functions that find the channel number and base address of a UMC in order to support more than two UMCs.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> --- drivers/edac/amd64_edac.c | 42 ++++++++++++++++++--------------------- drivers/edac/amd64_edac.h | 20 +++++++++++++++---- 2 files changed, 35 insertions(+), 27 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 9947437d9574..507d824fe45a 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -449,6 +449,9 @@ static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, #define for_each_chip_select_mask(i, dct, pvt) \ for (i = 0; i < pvt->csels[dct].m_cnt; i++) +#define for_each_umc(i) \ + for (i = 0; i < num_umcs; i++) + /* * @input_addr is an InputAddr associated with the node given by mci. Return the * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr). @@ -722,7 +725,7 @@ static unsigned long determine_edac_cap(struct amd64_pvt *pvt) if (pvt->umc) { u8 i, umc_en_mask = 0, dimm_ecc_en_mask = 0; - for (i = 0; i < NUM_UMCS; i++) { + for_each_umc(i) { if (!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT)) continue; @@ -811,7 +814,7 @@ static void __dump_misc_regs_df(struct amd64_pvt *pvt) struct amd64_umc *umc; u32 i, tmp, umc_base; - for (i = 0; i < NUM_UMCS; i++) { + for_each_umc(i) { umc_base = get_umc_base(i); umc = &pvt->umc[i]; @@ -1388,7 +1391,7 @@ static int f17_early_channel_count(struct amd64_pvt *pvt) int i, channels = 0; /* SDP Control bit 31 (SdpInit) is clear for unused UMC channels */ - for (i = 0; i < NUM_UMCS; i++) + for_each_umc(i) channels += !!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT); amd64_info("MCT channel count: %d\n", channels); @@ -2473,18 +2476,14 @@ static inline void decode_bus_error(int node_id, struct mce *m) * To find the UMC channel represented by this bank we need to match on its * instance_id. The instance_id of a bank is held in the lower 32 bits of its * IPID. + * + * Currently, we can derive the channel number by looking at the 6th byte in + * the instance_id. For example, instance_id=0xYXXXXX where Y is the channel + * number. */ -static int find_umc_channel(struct amd64_pvt *pvt, struct mce *m) +static int find_umc_channel(struct mce *m) { - u32 umc_instance_id[] = {0x50f00, 0x150f00}; - u32 instance_id = m->ipid & GENMASK(31, 0); - int i, channel = -1; - - for (i = 0; i < ARRAY_SIZE(umc_instance_id); i++) - if (umc_instance_id[i] == instance_id) - channel = i; - - return channel; + return (m->ipid & GENMASK(31, 0)) >> 20; } static void decode_umc_error(int node_id, struct mce *m) @@ -2506,11 +2505,7 @@ static void decode_umc_error(int node_id, struct mce *m) if (m->status & MCI_STATUS_DEFERRED) ecc_type = 3; - err.channel = find_umc_channel(pvt, m); - if (err.channel < 0) { - err.err_code = ERR_CHANNEL; - goto log_error; - } + err.channel = find_umc_channel(m); if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) { err.err_code = ERR_NORM_ADDR; @@ -2612,7 +2607,7 @@ static void determine_ecc_sym_sz(struct amd64_pvt *pvt) if (pvt->umc) { u8 i; - for (i = 0; i < NUM_UMCS; i++) { + for_each_umc(i) { /* Check enabled channels only: */ if ((pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) && (pvt->umc[i].ecc_ctrl & BIT(7))) { @@ -2648,7 +2643,7 @@ static void __read_mc_regs_df(struct amd64_pvt *pvt) u32 i, umc_base; /* Read registers from each UMC */ - for (i = 0; i < NUM_UMCS; i++) { + for_each_umc(i) { umc_base = get_umc_base(i); umc = &pvt->umc[i]; @@ -3061,7 +3056,8 @@ static bool ecc_enabled(struct pci_dev *F3, u16 nid) if (boot_cpu_data.x86 >= 0x17) { u8 umc_en_mask = 0, ecc_en_mask = 0; - for (i = 0; i < NUM_UMCS; i++) { + set_num_umcs(); + for_each_umc(i) { u32 base = get_umc_base(i); /* Only check enabled UMCs. */ @@ -3114,7 +3110,7 @@ f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt) { u8 i, ecc_en = 1, cpk_en = 1; - for (i = 0; i < NUM_UMCS; i++) { + for_each_umc(i) { if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) { ecc_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_ENABLED); cpk_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_CHIPKILL_CAP); @@ -3273,7 +3269,7 @@ static int init_one_instance(unsigned int nid) goto err_free; if (pvt->fam >= 0x17) { - pvt->umc = kcalloc(NUM_UMCS, sizeof(struct amd64_umc), GFP_KERNEL); + pvt->umc = kcalloc(num_umcs, sizeof(struct amd64_umc), GFP_KERNEL); if (!pvt->umc) { ret = -ENOMEM; goto err_free; diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h index de8dbb0b42b5..435450bf8684 100644 --- a/drivers/edac/amd64_edac.h +++ b/drivers/edac/amd64_edac.h @@ -274,8 +274,6 @@ #define UMC_SDP_INIT BIT(31) -#define NUM_UMCS 2 - enum amd_families { K8_CPUS = 0, F10_CPUS, @@ -399,8 +397,22 @@ struct err_info { static inline u32 get_umc_base(u8 channel) { - /* ch0: 0x50000, ch1: 0x150000 */ - return 0x50000 + (!!channel << 20); + /* chY: 0xY50000 */ + return 0x50000 + (channel << 20); +} + +static u8 num_umcs; + +static inline void set_num_umcs(void) +{ + u8 model = boot_cpu_data.x86_model; + + if (model >= 0x30 && model <= 0x3f) + num_umcs = 8; + else + num_umcs = 2; + + edac_dbg(1, "Number of UMCs: %x", num_umcs); } static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i) -- 2.17.1
| |