lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode
Date


-----Original Message-----
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Sent: 2019年2月6日 2:03
To: Xiaowei Bao <xiaowei.bao@nxp.com>
Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCHv6 1/4] dt-bindings: add DT binding for the layerscape PCIe controller with EP mode

On Tue, Jan 22, 2019 at 02:33:25PM +0800, Xiaowei Bao wrote:
> Add the documentation for the Device Tree binding for the layerscape
> PCIe controller with EP mode.
>
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> Reviewed-by: Minghuan Lian <minghuan.lian@nxp.com>
> Reviewed-by: Zhiqiang Hou <zhiqiang.hou@nxp.com>
> Reviewed-by: Rob Herring <robh+dt@kernel.org>
> ---
> v2:
> - Add the SoC specific compatibles.
> v3:
> - modify the commit message.
> v4:
> - no change.
> v5:
> - no change.
> v6:
> - no change.
>
> .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)

Applied the series to pci/layerscape for v5.1, thanks.
[Xiaowei Bao] Hi Lorenzo, thank a lot.

Lorenzo
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 9b2b8d6..e20ceaa 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -13,6 +13,7 @@ information.
>
> Required properties:
> - compatible: should contain the platform identifier such as:
> + RC mode:
> "fsl,ls1021a-pcie"
> "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
> "fsl,ls2088a-pcie"
> @@ -20,6 +21,8 @@ Required properties:
> "fsl,ls1046a-pcie"
> "fsl,ls1043a-pcie"
> "fsl,ls1012a-pcie"
> + EP mode:
> + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> - reg: base addresses and lengths of the PCIe controller register blocks.
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
> --
> 1.7.1
>
\
 
 \ /
  Last update: 2019-02-19 07:58    [W:0.068 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site