lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/10] MIPS: SGI-IP27 rework
Date
SGI IP27 (Origin/Onyx2) and SGI IP30 (Octane) have a similair
architecture and share some hardware (ioc3/bridge). To share
the software parts this patchset reworks SGI IP27 interrupt
and pci bridge code. By using features Linux gained during the
many years since SGI IP27 code was integrated this even results
in code reduction and IMHO cleaner code.

Tests have been done on a two module O200 (4 CPUs) and an
Origin 2000 (8 CPUs).

My next step in integrating SGI IP30 support is splitting ioc3eth
into a MFD and subdevice drivers. Prototype is working, but needs
still more clean ups.

Changes in v2:

- replaced HUB_L/HUB_S by __raw_readq/__raw_writeq
- removed union bridge_ate
- replaced remaing fields in slice_data by per_cpu data
- use generic_handle_irq instead of do_IRQ
- use hierarchy irq domain for stacking bridge and hub interrupt
- moved __dma_to_phys/__phy_to_dma to mach-ip27/dma-direct.h
- use dev_to_node() for pcibus_to_node() implementation

Thomas Bogendoerfer (10):
MIPS: SGI-IP27: get rid of volatile and hubreg_t
MIPS: SGI-IP27: clean up bridge access and header files
MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
MIPS: SGI-IP27: do xtalk scanning later
MIPS: SGI-IP27: do boot CPU init later
MIPS: SGI-IP27: rework HUB interrupts
PCI: call add_bus method also for root bus
MIPS: SGI-IP27: use generic PCI driver
genirq/irqdomain: fall back to default domain when creating hierarchy
domain
MIPS: SGI-IP27: abstract chipset irq from bridge

arch/mips/Kconfig | 4 +
arch/mips/include/asm/dma-direct.h | 2 +
arch/mips/include/asm/mach-generic/dma-direct.h | 7 +
arch/mips/include/asm/mach-ip27/dma-direct.h | 20 +
arch/mips/include/asm/mach-ip27/irq.h | 12 +-
arch/mips/include/asm/mach-ip27/mmzone.h | 9 -
arch/mips/include/asm/mach-ip27/topology.h | 13 +-
arch/mips/include/asm/pci.h | 8 +
arch/mips/include/asm/pci/bridge.h | 211 ++++----
arch/mips/include/asm/smp-ops.h | 1 +
arch/mips/include/asm/sn/addrs.h | 72 +--
arch/mips/include/asm/sn/arch.h | 2 -
arch/mips/include/asm/sn/intr.h | 6 +
arch/mips/include/asm/sn/io.h | 2 +-
arch/mips/include/asm/sn/sn0/addrs.h | 5 -
arch/mips/include/asm/xtalk/xtalk.h | 9 -
arch/mips/kernel/smp.c | 2 +
arch/mips/pci/Makefile | 1 -
arch/mips/pci/ops-bridge.c | 322 ------------
arch/mips/pci/pci-ip27.c | 233 ---------
arch/mips/sgi-ip27/Makefile | 3 +-
arch/mips/sgi-ip27/ip27-hubio.c | 4 +-
arch/mips/sgi-ip27/ip27-init.c | 41 +-
arch/mips/sgi-ip27/ip27-irq-pci.c | 266 ----------
arch/mips/sgi-ip27/ip27-irq.c | 331 ++++++++-----
arch/mips/sgi-ip27/ip27-irqno.c | 48 --
arch/mips/sgi-ip27/ip27-memory.c | 34 +-
arch/mips/sgi-ip27/ip27-nmi.c | 64 +--
arch/mips/sgi-ip27/ip27-smp.c | 5 +-
arch/mips/sgi-ip27/ip27-timer.c | 42 +-
arch/mips/sgi-ip27/ip27-xtalk.c | 44 +-
drivers/pci/controller/Kconfig | 3 +
drivers/pci/controller/Makefile | 1 +
drivers/pci/controller/pci-xtalk-bridge.c | 623 ++++++++++++++++++++++++
drivers/pci/probe.c | 6 +
include/linux/platform_data/xtalk-bridge.h | 17 +
kernel/irq/irqdomain.c | 5 +-
37 files changed, 1126 insertions(+), 1352 deletions(-)
create mode 100644 arch/mips/include/asm/mach-generic/dma-direct.h
create mode 100644 arch/mips/include/asm/mach-ip27/dma-direct.h
delete mode 100644 arch/mips/pci/ops-bridge.c
delete mode 100644 arch/mips/pci/pci-ip27.c
delete mode 100644 arch/mips/sgi-ip27/ip27-irq-pci.c
delete mode 100644 arch/mips/sgi-ip27/ip27-irqno.c
create mode 100644 drivers/pci/controller/pci-xtalk-bridge.c
create mode 100644 include/linux/platform_data/xtalk-bridge.h

--
2.13.7

\
 
 \ /
  Last update: 2019-02-19 16:58    [W:0.162 / U:15.460 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site