lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: qcom: Don't deassert reset GPIO during probe
On Wed 13 Feb 07:23 PST 2019, Lorenzo Pieralisi wrote:

> On Fri, Jan 25, 2019 at 03:26:16PM -0800, Bjorn Andersson wrote:
> > Acquiring the reset GPIO low means that reset is being deasserted, this
> > is followed almost immediately with qcom_pcie_host_init() asserting it,
> > initializing it and then finally deasserting it again, for the link to
> > come up.
> >
> > Some PCIe devices requires a minimum time between the initial deassert
> > and subsequent reset cycles. In a platform that boots with the reset
> > GPIO asserted this requirement is being violated by this deassert/assert
> > pulse.
> >
> > Acquiring the reset GPIO high will prevent this by matching the state to
> > the subsequent asserted state.
> >
> > Cc: stable@vger.kernel.org
>
> Missing Fixes: tag, please provide me one so that I can proceed.
>

This applies to the original commit introducing this driver, so:

Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")

Regards,
Bjorn

\
 
 \ /
  Last update: 2019-02-19 06:17    [W:0.047 / U:61.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site