lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] regulator: da9063: Select maximum current in specific range for set_current_limit
Date
On 19 February 2019 13:31, Axel Lin wrote:

> To: Mark Brown <broonie@kernel.org>
> Subject: [PATCH 2/2] regulator: da9063: Select maximum current in specific range for set_current_limit
>
> Selecting the minimal value is only true for voltage regulators.
> For current regulators the maximum in the given range should be
> selected instead.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> drivers/regulator/da9063-regulator.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-
> regulator.c
> index 85c45577bad1..a83bbd3dbc37 100644
> --- a/drivers/regulator/da9063-regulator.c
> +++ b/drivers/regulator/da9063-regulator.c
> @@ -167,7 +167,7 @@ static int da9063_set_current_limit(struct regulator_dev
> *rdev,
> const struct da9063_regulator_info *rinfo = regl->info;
> int n, tval;
>
> - for (n = 0; n < rinfo->n_current_limits; n++) {
> + for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
> tval = rinfo->current_limits[n];
> if (tval >= min_uA && tval <= max_uA)
> return regmap_field_write(regl->ilimit, n);

Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>

\
 
 \ /
  Last update: 2019-02-19 14:58    [W:0.029 / U:13.440 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site