lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] regulator: da9063: Select maximum current in specific range for set_current_limit
Date
Selecting the minimal value is only true for voltage regulators.
For current regulators the maximum in the given range should be
selected instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/da9063-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 85c45577bad1..a83bbd3dbc37 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -167,7 +167,7 @@ static int da9063_set_current_limit(struct regulator_dev *rdev,
const struct da9063_regulator_info *rinfo = regl->info;
int n, tval;

- for (n = 0; n < rinfo->n_current_limits; n++) {
+ for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
tval = rinfo->current_limits[n];
if (tval >= min_uA && tval <= max_uA)
return regmap_field_write(regl->ilimit, n);
--
2.17.1
\
 
 \ /
  Last update: 2019-02-19 14:32    [W:0.061 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site