lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] regulator: da9062: Select maximum current in specific range for set_current_limit
Date
Selecting the minimal value is only true for voltage regulators.
For current regulators the maximum in the given range should be
selected instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/da9062-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index d06e9600fa18..4c5d6ad853f8 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -126,7 +126,7 @@ static int da9062_set_current_limit(struct regulator_dev *rdev,
const struct da9062_regulator_info *rinfo = regl->info;
int n, tval;

- for (n = 0; n < rinfo->n_current_limits; n++) {
+ for (n = rinfo->n_current_limits - 1; n >= 0; n--) {
tval = rinfo->current_limits[n];
if (tval >= min_ua && tval <= max_ua)
return regmap_field_write(regl->ilimit, n);
--
2.17.1
\
 
 \ /
  Last update: 2019-02-19 14:32    [W:0.054 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site