lkml.org 
[lkml]   [2019]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/7] PCI: qcom: Use clk_bulk API for 2.4.0 controllers
Date
Before introducing the QCS404 platform, which uses the same PCIe
controller as IPQ4019, migrate this to use the bulk clock API, in order
to make the error paths slighly cleaner.

Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/pci/controller/dwc/pcie-qcom.c | 48 +++++++-------------------
1 file changed, 13 insertions(+), 35 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index d185ea5fe996..b4d8bcf6eb77 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -113,9 +113,8 @@ struct qcom_pcie_resources_2_3_2 {
};

struct qcom_pcie_resources_2_4_0 {
- struct clk *aux_clk;
- struct clk *master_clk;
- struct clk *slave_clk;
+ struct clk_bulk_data clks[3];
+ int num_clks;
struct reset_control *axi_m_reset;
struct reset_control *axi_s_reset;
struct reset_control *pipe_reset;
@@ -638,18 +637,17 @@ static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
+ int ret;

- res->aux_clk = devm_clk_get(dev, "aux");
- if (IS_ERR(res->aux_clk))
- return PTR_ERR(res->aux_clk);
+ res->clks[0].id = "aux";
+ res->clks[1].id = "master_bus";
+ res->clks[2].id = "slave_bus";

- res->master_clk = devm_clk_get(dev, "master_bus");
- if (IS_ERR(res->master_clk))
- return PTR_ERR(res->master_clk);
+ res->num_clks = 3;

- res->slave_clk = devm_clk_get(dev, "slave_bus");
- if (IS_ERR(res->slave_clk))
- return PTR_ERR(res->slave_clk);
+ ret = devm_clk_bulk_get(dev, res->num_clks, res->clks);
+ if (ret < 0)
+ return ret;

res->axi_m_reset = devm_reset_control_get_exclusive(dev, "axi_m");
if (IS_ERR(res->axi_m_reset))
@@ -719,9 +717,7 @@ static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
reset_control_assert(res->axi_m_sticky_reset);
reset_control_assert(res->pwr_reset);
reset_control_assert(res->ahb_reset);
- clk_disable_unprepare(res->aux_clk);
- clk_disable_unprepare(res->master_clk);
- clk_disable_unprepare(res->slave_clk);
+ clk_bulk_disable_unprepare(res->num_clks, res->clks);
}

static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
@@ -850,23 +846,9 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)

usleep_range(10000, 12000);

- ret = clk_prepare_enable(res->aux_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable iface clock\n");
+ ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
+ if (ret)
goto err_clk_aux;
- }
-
- ret = clk_prepare_enable(res->master_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable core clock\n");
- goto err_clk_axi_m;
- }
-
- ret = clk_prepare_enable(res->slave_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable phy clock\n");
- goto err_clk_axi_s;
- }

/* enable PCIe clocks and resets */
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
@@ -891,10 +873,6 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)

return 0;

-err_clk_axi_s:
- clk_disable_unprepare(res->master_clk);
-err_clk_axi_m:
- clk_disable_unprepare(res->aux_clk);
err_clk_aux:
reset_control_assert(res->ahb_reset);
err_rst_ahb:
--
2.18.0
\
 
 \ /
  Last update: 2019-02-19 07:05    [W:0.109 / U:4.392 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site