lkml.org 
[lkml]   [2019]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 0/4] Restore change_pte optimization to its former glory
On Tue, Feb 19, 2019 at 10:37:01AM +0800, Peter Xu wrote:
> On Mon, Feb 18, 2019 at 12:45:05PM -0500, Andrea Arcangeli wrote:
> > On Mon, Feb 18, 2019 at 11:04:13AM -0500, Jerome Glisse wrote:
> > > So i run 2 exact same VMs side by side (copy of same COW image) and
> > > built the same kernel tree inside each (that is the only important
> > > workload that exist ;)) but the change_pte did not have any impact:
> > >
> > > before mean {real: 1358.250977, user: 16650.880859, sys: 839.199524, npages: 76855.390625}
> > > before stdev {real: 6.744010, user: 108.863762, sys: 6.840437, npages: 1868.071899}
> > > after mean {real: 1357.833740, user: 16685.849609, sys: 839.646973, npages: 76210.601562}
> > > after stdev {real: 5.124797, user: 78.469360, sys: 7.009164, npages: 2468.017578}
> > > without mean {real: 1358.501343, user: 16674.478516, sys: 837.791992, npages: 76225.203125}
> > > without stdev {real: 5.541104, user: 97.998367, sys: 6.715869, npages: 1682.392578}
> > >
> > > Above is time taken by make inside each VM for all yes config. npages
> > > is the number of page shared reported on the host at the end of the
> > > build.
> >
> > Did you set /sys/kernel/mm/ksm/sleep_millisecs to 0?
> >
> > It would also help to remove the checksum check from mm/ksm.c:
> >
> > - if (rmap_item->oldchecksum != checksum) {
> > - rmap_item->oldchecksum = checksum;
> > - return;
> > - }
> >
> > One way or another, /sys/kernel/mm/ksm/pages_shared and/or
> > pages_sharing need to change significantly to be sure we're exercising
> > the COW/merging code that uses change_pte. KSM is smart enough to
> > merge only not frequently changing pages, and with the default KSM
> > code this probably works too well for a kernel build.
>
> Would it also make sense to track how many pages are really affected
> by change_pte (say, in kvm_set_pte_rmapp, count avaliable SPTEs that
> are correctly rebuilt)? I'm thinking even if many pages are merged by
> KSM it's still possible that these pages are not actively shadowed by
> KVM MMU, meanwhile change_pte should only affect actively shadowed
> SPTEs. In other words, IMHO we might not be able to observe obvious
> performance differeneces if the pages we are accessing are not merged
> by KSM. In our case (building the kernel), IIUC the mostly possible
> shared pages are system image pages, however when building the kernel
> I'm thinking whether these pages will be frequently accesses, and
> whether this could lead to similar performance numbers.

I checked that, if no KVM is running KSM never merge anything (after
bumping KSM page to scan to 10000 and sleep to 0). It starts merging
once i start KVM. Then i wait a bit for KSM to stabilize (ie to merge
the stock KVM pages). It is only once KSM count is somewhat stable
that i run the test and check that KSM count goes up significantly
while test is running.

KSM will definitly go through the change_pte path for KVM so i am
definitly testing the change_pte path.

I have been running the micro benchmark and on that i do see a perf
improvement i will report shortly once i am done gathering enough
data.

Cheers,
Jérôme

\
 
 \ /
  Last update: 2019-02-19 03:44    [W:0.389 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site