lkml.org 
[lkml]   [2019]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 07/10] usb: dwc3: Registering a role switch in the DRD code.
From
Date
Hi,

On 2019/2/19 1:30, Valentin Schneider wrote:
> Hi,
>
> On 18/02/2019 11:23, Yu Chen wrote:
> [...]
>> @@ -522,6 +556,15 @@ int dwc3_drd_init(struct dwc3 *dwc)
>> dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
>> }
>>
>> + dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
>> + dwc3_role_switch.set = dwc3_usb_role_switch_set;
>> + dwc3_role_switch.get = dwc3_usb_role_switch_get;
>> + dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
>
> Building arm64 defconfig gives me this:
>
> drivers/usb/dwc3/drd.o: In function `dwc3_drd_exit':
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604:(.text+0x814): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_unregister'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604:(.text+0x844): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_unregister'
> drivers/usb/dwc3/drd.o: In function `dwc3_drd_init':
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562: undefined reference to `usb_role_switch_register'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562:(.text+0xa20): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_register'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562: undefined reference to `usb_role_switch_register'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562:(.text+0xb4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_register'
> Makefile:1024: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
>
> This has CONFIG_USB_ROLE_SWITCH=m, setting it as a built-in makes the thing
> linkable.
>
> I suppose that's because defconfig gives us
>
> CONFIG_USB_DWC3_DUAL_ROLE=y
>
> but then that should probably force a CONFIG_USB_ROLE_SWITCH=y. My
> immediate reaction to this would be to add:
>
> ---
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 2b1494460d0c..661b1d2efc8b 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -44,6 +44,7 @@ config USB_DWC3_DUAL_ROLE
> bool "Dual Role mode"
> depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
> depends on (EXTCON=y || EXTCON=USB_DWC3)
> + select USB_ROLE_SWITCH
> help
> This is the default mode of working of DWC3 controller where
> both host and gadget features are enabled.
> ---
>
> Not sure how acceptable that is though.
>
Thanks for your notice! I will add this in next version.

>
>> + if (ret) {
>> + dwc3_drd_exit(dwc);
>> + return PTR_ERR(dwc->role_sw);
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -557,4 +600,6 @@ void dwc3_drd_exit(struct dwc3 *dwc)
>>
>> if (!dwc->edev)
>> free_irq(dwc->otg_irq, dwc);
>> +
>> + usb_role_switch_unregister(dwc->role_sw);
>> }
>>
>
> .
>

Thanks
Yu Chen

\
 
 \ /
  Last update: 2019-02-19 02:41    [W:0.062 / U:4.704 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site