lkml.org 
[lkml]   [2019]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/3] dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller
Date


On 18.02.2019 13:01, Nicolas Ferre - M43238 wrote:
> On 14/02/2019 at 12:24, Claudiu Beznea - M18063 wrote:
>> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>>
>> Add documentation for SAM9X60 shutdown controller.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> index 14f319f694b7..9711052c5800 100644
>> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> @@ -83,7 +83,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
>> 1) shdwc node
>>
>> required properties:
>> -- compatible: should be "atmel,sama5d2-shdwc".
>> +- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
>> - reg: should contain registers location and length
>> - clocks: phandle to input clock.
>> - #address-cells: should be one. The cell is the wake-up input index.
>> @@ -95,6 +95,10 @@ optional properties:
>> microseconds. It's usually a board-related property.
>> - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>>
>> +optional properties for microchip,sam9x60-shdwc:
>
> is it for sam9x60 only or is the optional property "debounce-delay-us"
> applicable to this SoC?

No, I meant only to RTC and RTT.

>
>> +- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>> +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
>
> Well, I would make clear that the only additional optional property is
> "atmel,wakeup-rtt-timer" while the 2 other optional properties still
> apply...

Ok, I will take care of this in next version.

Thank you,
Claudiu Beznea

>
>
>> The node contains child nodes for each wake-up input that the platform uses.
>>
>> 2) input nodes
>>
>
>
\
 
 \ /
  Last update: 2019-02-18 15:50    [W:0.176 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site