lkml.org 
[lkml]   [2019]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 09/22] iommu/mediatek: Refine protect memory definition
Date
The protect memory setting is a little different in the different SoCs.
In the register REG_MMU_CTRL_REG(0x110), the TF_PROT(translation fault
protect) shift bit is normally 4 while it shift 5 bits only in the
mt8173. This patch delete the complex MACRO and use a common if-else
instead.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 3bf7b76..483f6e8 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -52,12 +52,9 @@
#define REG_MMU_DCM_DIS 0x050

#define REG_MMU_CTRL_REG 0x110
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR (2 << 4)
#define F_MMU_PREFETCH_RT_REPLACE_MOD BIT(4)
-#define F_MMU_TF_PROTECT_SEL_SHIFT(data) \
- ((data)->plat_data->m4u_plat == M4U_MT2712 ? 4 : 5)
-/* It's named by F_MMU_TF_PROT_SEL in mt2712. */
-#define F_MMU_TF_PROTECT_SEL(prot, data) \
- (((prot) & 0x3) << F_MMU_TF_PROTECT_SEL_SHIFT(data))
+#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173 (2 << 5)

#define REG_MMU_IVRP_PADDR 0x114

@@ -519,9 +516,11 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
return ret;
}

- regval = F_MMU_TF_PROTECT_SEL(2, data);
if (data->plat_data->m4u_plat == M4U_MT8173)
- regval |= F_MMU_PREFETCH_RT_REPLACE_MOD;
+ regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
+ F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
+ else
+ regval = F_MMU_TF_PROT_TO_PROGRAM_ADDR;
writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);

regval = F_L2_MULIT_HIT_EN |
--
1.9.1
\
 
 \ /
  Last update: 2019-02-17 10:08    [W:0.136 / U:12.936 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site