lkml.org 
[lkml]   [2019]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] x86/tsc: Allow quick PIT calibration despite interruptions

* Jan H. Schönherr <jan@schnhrr.de> wrote:

> Some systems experience regular interruptions (60 Hz SMI?), that prevent
> the quick PIT calibration from succeeding: individual interruptions can be
> so long, that the PIT MSB is observed to decrement by 2 or 3 instead of 1.
> The existing code cannot recover from this.
>
> The system in question is an AMD Ryzen Threadripper 2950X, microcode
> 0x800820b, on an ASRock Fatal1ty X399 Professional Gaming, BIOS P3.30.
>
> Change the code to handle (almost) arbitrary interruptions, as long
> as they happen only once in a while and they do not take too long.
> Specifically, also cover an interruption during the very first reads.
>
> Signed-off-by: Jan H. Schönherr <jan@schnhrr.de>
> ---
>
> v2:
> - Dropped the other hacky patch for the time being.
> - Fixed the early exit check.
> - Hopefully fixed all inaccurate math in v1.
> - Extended comments.
>
> arch/x86/kernel/tsc.c | 91 +++++++++++++++++++++++++++----------------
> 1 file changed, 57 insertions(+), 34 deletions(-)

BTW., I tried this on my Ryzen system, and it appears to be working well:

old (without patch):

[ 0.000000] tsc: Fast TSC calibration failed
[ 0.032000] tsc: PIT calibration matches HPET. 2 loops
[ 0.032000] tsc: Detected 3599.655 MHz processor
[ 0.000014] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e30d9825f, max_idle_ns: 440795248078 ns
[ 0.160104] clocksource: Switched to clocksource tsc-early
[ 1.468132] tsc: Refined TSC clocksource calibration: 3599.927 MHz
[ 1.478418] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e40e9d0e7, max_idle_ns: 440795301696 ns
[ 1.483197] clocksource: Switched to clocksource tsc

new (with patch):

[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3599.857 MHz processor
[ 0.736649] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e3cc37f8b, max_idle_ns: 440795303609 ns
[ 0.896736] clocksource: Switched to clocksource tsc-early
[ 2.212732] tsc: Refined TSC clocksource calibration: 3599.931 MHz
[ 2.218368] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4128ece2, max_idle_ns: 440795387864 ns
[ 2.261799] clocksource: Switched to clocksource tsc

Tested-by: Ingo Molnar <mingo@kernel.org>

(Note that in the old log the printk timestamps start later so they are
no basis for boot time comparison.)

Thanks,

Ingo

\
 
 \ /
  Last update: 2019-02-15 11:37    [W:0.061 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site