[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 1/2] leds: Add Intel Cherry Trail Whiskey Cove PMIC LEDs

On 13-02-19 23:43, Hans de Goede wrote:
> Hi,
> On 12-02-19 21:59, Yauhen Kharuzhy wrote:
>> Add support for LEDs connected to the Intel Cherry Trail Whiskey Cove
>> PMIC. Charger and general-purpose leds are supported. Hardware blinking
>> is implemented, breathing is not.
>> This driver was tested with Lenovo Yoga Book notebook.


> Note that in my experience the "charging" mode only works
> when bits 0-1 have the value 10.

Ok, scrap that I don't know where this info in my notes
came from (probably user error), the power-on-reset
value for bits 0-1 is 00 and then the hw controls the
charging LED just fine. So your code is right, bit 0
switches between hw-control (0) and user-control (1) and
bit 1 is on/off when user-control is enabled.



 \ /
  Last update: 2019-02-14 11:05    [W:0.113 / U:2.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site