lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 0/3] Stingray USB PHY driver support
Hi Kishon,

Could you please help to review and provide your comments to this
patch series when you have time?

Regards,
Srinath.

On Wed, Feb 6, 2019 at 11:03 PM Srinath Mannam
<srinath.mannam@broadcom.com> wrote:
>
> These patches add Stingray USB PHY driver and its corresponding
> DT nodes with documentation.
>
> This patch set is based on Linux-5.0-rc2.
>
> Changes from v2:
> - Addressed Kishon review comments
> - Updated patchset to Linux-5.0-rc2
>
> Changes from v1:
> - Addressed Kishon review comments
> - phy init call return value handle
>
> Srinath Mannam (3):
> dt-bindings: phy: Add Stingray USB PHY binding document
> phy: sr-usb: Add Stingray USB PHY driver
> arm64: dts: Add USB DT nodes for Stingray SoC
>
> .../bindings/phy/brcm,stingray-usb-phy.txt | 62 ++++
> .../boot/dts/broadcom/stingray/stingray-usb.dtsi | 95 ++++++
> .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 +
> drivers/phy/broadcom/Kconfig | 11 +
> drivers/phy/broadcom/Makefile | 1 +
> drivers/phy/broadcom/phy-bcm-sr-usb.c | 371 +++++++++++++++++++++
> 6 files changed, 541 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
> create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
> create mode 100644 drivers/phy/broadcom/phy-bcm-sr-usb.c
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-02-15 05:31    [W:0.323 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site