lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V5 1/2] arm64: dts: freescale: imx8qxp: add cpu opp table
On 14-02-19, 08:02, Anson Huang wrote:
> Add i.MX8QXP CPU opp table to support cpufreq.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V4:
> - remove redundant clock-latency property in A35_0;
> - add #cooling-cells for all A35 core.
> ---
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 4021f25..fad1259 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -34,6 +34,9 @@
> reg = <0x0 0x0>;
> enable-method = "psci";
> next-level-cache = <&A35_L2>;
> + clocks = <&clk IMX_A35_CLK>;

As I said in my previous email, mentioning clocks is important too for
other CPUs.

> + operating-points-v2 = <&a35_0_opp_table>;
> + #cooling-cells = <2>;
> };
>
> A35_1: cpu@1 {
> @@ -42,6 +45,8 @@
> reg = <0x0 0x1>;
> enable-method = "psci";
> next-level-cache = <&A35_L2>;
> + operating-points-v2 = <&a35_0_opp_table>;
> + #cooling-cells = <2>;
> };
>
> A35_2: cpu@2 {
> @@ -50,6 +55,8 @@
> reg = <0x0 0x2>;
> enable-method = "psci";
> next-level-cache = <&A35_L2>;
> + operating-points-v2 = <&a35_0_opp_table>;
> + #cooling-cells = <2>;
> };
>
> A35_3: cpu@3 {
> @@ -58,6 +65,8 @@
> reg = <0x0 0x3>;
> enable-method = "psci";
> next-level-cache = <&A35_L2>;
> + operating-points-v2 = <&a35_0_opp_table>;
> + #cooling-cells = <2>;
> };
>
> A35_L2: l2-cache0 {
> @@ -65,6 +74,24 @@
> };
> };
>
> + a35_0_opp_table: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <1000000>;
> + clock-latency-ns = <150000>;
> + };
> +
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1100000>;
> + clock-latency-ns = <150000>;
> + opp-suspend;
> + };
> + };
> +
> gic: interrupt-controller@51a00000 {
> compatible = "arm,gic-v3";
> reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
> --
> 2.7.4

--
viresh

\
 
 \ /
  Last update: 2019-02-14 09:34    [W:0.052 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site