lkml.org 
[lkml]   [2019]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [RFC v3 17/19] of: unittest: migrate tests to run on KUnit
    On Tue, Feb 12, 2019 at 7:44 PM Brendan Higgins
    <brendanhiggins@google.com> wrote:
    >
    > On Wed, Nov 28, 2018 at 12:56 PM Rob Herring <robh@kernel.org> wrote:
    > >
    > > On Wed, Nov 28, 2018 at 1:38 PM Brendan Higgins
    > > <brendanhiggins@google.com> wrote:
    > > >
    > > > Migrate tests without any cleanup, or modifying test logic in anyway to
    > > > run under KUnit using the KUnit expectation and assertion API.
    > >
    > > Nice! You beat me to it. This is probably going to conflict with what
    > > is in the DT tree for 4.21. Also, please Cc the DT list for
    > > drivers/of/ changes.
    > >
    > > Looks good to me, but a few mostly formatting comments below.
    >
    > I just realized that we never talked about your other comments, and I
    > still have some questions. (Sorry, it was the last thing I looked at
    > while getting v4 ready.) No worries if you don't get to it before I
    > send v4 out, I just didn't want you to think I was ignoring you.
    >
    > >
    > > >
    > > > Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
    > > > ---
    > > > drivers/of/Kconfig | 1 +
    > > > drivers/of/unittest.c | 1405 ++++++++++++++++++++++-------------------
    > > > 2 files changed, 752 insertions(+), 654 deletions(-)
    > > >
    > <snip>
    > > > diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
    > > > index 41b49716ac75f..a5ef44730ffdb 100644
    > > > --- a/drivers/of/unittest.c
    > > > +++ b/drivers/of/unittest.c
    > <snip>
    > > > -
    > > > -static void __init of_unittest_find_node_by_name(void)
    > > > +static void of_unittest_find_node_by_name(struct kunit *test)
    > >
    > > Why do we have to drop __init everywhere? The tests run later?
    >
    > From the standpoint of a unit test __init doesn't really make any
    > sense, right? I know that right now we are running as part of a
    > kernel, but the goal should be that a unit test is not part of a
    > kernel and we just include what we need.

    Well, the test only runs during boot and better to free the space when
    done with it. There was some desire to make it a kernel module and
    then we'd also need to get rid of __init too.

    > Even so, that's the future. For now, I did not put the KUnit
    > infrastructure in the .init section because I didn't think it belonged
    > there. In practice, KUnit only knows how to run during the init phase
    > of the kernel, but I don't think it should be restricted there. You
    > should be able to run tests whenever you want because you should be
    > able to test anything right? I figured any restriction on that is
    > misleading and will potentially get in the way at worst, and
    > unnecessary at best especially since people shouldn't build a
    > production kernel with all kinds of unit tests inside.

    More folks will run things if they can be enabled on production
    kernels. If size is the only issue, modules mitigate that. However,
    there's probably APIs to test which we don't want to export to
    modules.

    I think in general, we change things in the kernel when needed, not
    for something in the future. Changing __init is simple enough to do
    later.

    OTOH, things get copied and maybe this we don't want copied, so we can
    remove it if you want to.

    > <snip>
    > > >
    > > > -static void __init of_unittest_property_string(void)
    > > > +static void of_unittest_property_string(struct kunit *test)
    > > > {
    > > > const char *strings[4];
    > > > struct device_node *np;
    > > > int rc;
    > > >
    > > > np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a");
    > > > - if (!np) {
    > > > - pr_err("No testcase data in device tree\n");
    > > > - return;
    > > > - }
    > > > -
    > > > - rc = of_property_match_string(np, "phandle-list-names", "first");
    > > > - unittest(rc == 0, "first expected:0 got:%i\n", rc);
    > > > - rc = of_property_match_string(np, "phandle-list-names", "second");
    > > > - unittest(rc == 1, "second expected:1 got:%i\n", rc);
    > > > - rc = of_property_match_string(np, "phandle-list-names", "third");
    > > > - unittest(rc == 2, "third expected:2 got:%i\n", rc);
    > > > - rc = of_property_match_string(np, "phandle-list-names", "fourth");
    > > > - unittest(rc == -ENODATA, "unmatched string; rc=%i\n", rc);
    > > > - rc = of_property_match_string(np, "missing-property", "blah");
    > > > - unittest(rc == -EINVAL, "missing property; rc=%i\n", rc);
    > > > - rc = of_property_match_string(np, "empty-property", "blah");
    > > > - unittest(rc == -ENODATA, "empty property; rc=%i\n", rc);
    > > > - rc = of_property_match_string(np, "unterminated-string", "blah");
    > > > - unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
    > > > + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, np);
    > > > +
    > > > + KUNIT_EXPECT_EQ(test,
    > > > + of_property_match_string(np,
    > > > + "phandle-list-names",
    > > > + "first"),
    > > > + 0);
    > > > + KUNIT_EXPECT_EQ(test,
    > > > + of_property_match_string(np,
    > > > + "phandle-list-names",
    > > > + "second"),
    > > > + 1);
    > >
    > > Fewer lines on these would be better even if we go over 80 chars.
    >
    > On the of_property_match_string(...), I have no opinion. I will do
    > whatever you like best.
    >
    > Nevertheless, as far as the KUNIT_EXPECT_*(...), I do have an opinion: I am
    > trying to establish a good, readable convention. Given an expect statement
    > structured as
    > ```
    > KUNIT_EXPECT_*(
    > test,
    > expect_arg_0, ..., expect_arg_n,
    > fmt_str, fmt_arg_0, ..., fmt_arg_n)
    > ```
    > where `test` is the `struct kunit` context argument, `expect_arg_{0, ..., n}`
    > are the arguments the expectations is being made about (so in the above example,
    > `of_property_match_string(...)` and `1`), and `fmt_*` is the optional format
    > string that comes at the end of some expectations.
    >
    > The pattern I had been trying to promote is the following:
    >
    > 1) If everything fits on 1 line, do that.
    > 2) If you must make a line split, prefer to keep `test` on its own line,
    > `expect_arg_{0, ..., n}` should be kept together, if possible, and the format
    > string should follow the conventions already most commonly used with format
    > strings.
    > 3) If you must split up `expect_arg_{0, ..., n}` each argument should get its
    > own line and should not share a line with either `test` or any `fmt_*`.

    You'd better write a checkpatch.pl check or else good luck enforcing that. :)

    > The reason I care about this so much is because expectations should be
    > extremely easy to read; they are the most important part of a unit
    > test because they tell you what the test is verifying. I am not
    > married to the formatting I proposed above, but I want something that
    > will be extremely easy to identify the arguments that the expectation
    > is on. Maybe that means that I need to add some syntactic fluff to
    > make it clearer, I don't know, but this is definitely something we
    > need to get right, especially in the earliest examples.

    Makes sense. I think putting the test (of_property_match_string) on
    one line furthers the readability.

    Rob

    \
     
     \ /
      Last update: 2019-02-14 21:11    [W:3.221 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site