Messages in this thread | | | Subject | Re: [PATCH v2 07/15] ndings: clock: milbeaut: add Milbeaut clock description | From | Stephen Boyd <> | Date | Wed, 13 Feb 2019 09:55:34 -0800 |
| |
The subject seems to have been cut off? "ndings"?
Quoting Sugaya Taichi (2019-02-08 04:27:03) > diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.txt b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt > new file mode 100644 > index 0000000..bcfc5df > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.txt > @@ -0,0 +1,49 @@ > +Milbeaut SoCs Clock Controller Binding > +---------------------------------------- > +Milbeaut SoCs Clock controller is an integrated clock controller, which > +generates and supplies to all modules. > + > +This binding uses common clock bindings > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt > + > +Required properties: > +- compatible: should be one of the following: > + "socionext,milbeaut-m10v-ccu" - for M10V SoC > +- reg: shall contain base address and length of clock registers > +- #clock-cells: shall be 1 > +- clocks: shall be an external clock > + > +Example: Clock controller node: > + > + clk: m10v-clk-ctrl@1d021000 { > + compatible = "socionext,milbeaut-m10v-clk-ccu";
I thought there was some length limit on compatible string names. 32 bytes? Just barely under!
| |