lkml.org 
[lkml]   [2019]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] clk: meson: Add G12A AO Clock + Reset Controller
Date
Add the Amlogic G12A AO Clock and Reset controller driver handling
generation of Always-On clocks :
- AO Clocks and Reset for Always-On modules
- 32K Generation for USB and CEC
- SAR ADC controller clock

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/clk/meson/Kconfig | 2 +
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/g12a-aoclk.c | 454 +++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a-aoclk.h | 34 +++
4 files changed, 491 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/meson/g12a-aoclk.c
create mode 100644 drivers/clk/meson/g12a-aoclk.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index b72439315340..3858747f5438 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -98,8 +98,10 @@ config COMMON_CLK_G12A
bool
depends on ARCH_MESON
select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_DUALDIV
select COMMON_CLK_MESON_MPLL
select COMMON_CLK_MESON_PLL
+ select COMMON_CLK_MESON_AO_CLKC
select COMMON_CLK_MESON_EE_CLKC
select MFD_SYSCON
help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 32d17f18541e..021fc290e749 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -16,5 +16,5 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
-obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o
+obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
diff --git a/drivers/clk/meson/g12a-aoclk.c b/drivers/clk/meson/g12a-aoclk.c
new file mode 100644
index 000000000000..1994e735396b
--- /dev/null
+++ b/drivers/clk/meson/g12a-aoclk.c
@@ -0,0 +1,454 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2019 Baylibre SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include "meson-aoclk.h"
+#include "g12a-aoclk.h"
+
+#include "clk-regmap.h"
+#include "clk-dualdiv.h"
+
+#define IN_PREFIX "ao-in-"
+
+/*
+ * AO Configuration Clock registers offsets
+ * Register offsets from the data sheet must be multiplied by 4.
+ */
+#define AO_RTI_STATUS_REG3 0x0C
+#define AO_RTI_PWR_CNTL_REG0 0x10
+#define AO_RTI_GEN_CNTL_REG0 0x40
+#define AO_CLK_GATE0 0x4c
+#define AO_CLK_GATE0_SP 0x50
+#define AO_OSCIN_CNTL 0x58
+#define AO_CEC_CLK_CNTL_REG0 0x74
+#define AO_CEC_CLK_CNTL_REG1 0x78
+#define AO_SAR_CLK 0x90
+#define AO_RTC_ALT_CLK_CNTL0 0x94
+#define AO_RTC_ALT_CLK_CNTL1 0x98
+
+/*
+ * Like every other peripheral clock gate in Amlogic Clock drivers,
+ * we are using CLK_IGNORE_UNUSED here, so we keep the state of the
+ * bootloader. The goal is to remove this flag at some point.
+ * Actually removing it will require some extensive test to be done safely.
+ */
+#define AXG_AO_GATE(_name, _reg, _bit) \
+static struct clk_regmap g12a_aoclk_##_name = { \
+ .data = &(struct clk_regmap_gate_data) { \
+ .offset = (_reg), \
+ .bit_idx = (_bit), \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = "g12a_ao_" #_name, \
+ .ops = &clk_regmap_gate_ops, \
+ .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk" }, \
+ .num_parents = 1, \
+ .flags = CLK_IGNORE_UNUSED, \
+ }, \
+}
+
+AXG_AO_GATE(ahb, AO_CLK_GATE0, 0);
+AXG_AO_GATE(ir_in, AO_CLK_GATE0, 1);
+AXG_AO_GATE(i2c_m0, AO_CLK_GATE0, 2);
+AXG_AO_GATE(i2c_s0, AO_CLK_GATE0, 3);
+AXG_AO_GATE(uart, AO_CLK_GATE0, 4);
+AXG_AO_GATE(prod_i2c, AO_CLK_GATE0, 5);
+AXG_AO_GATE(uart2, AO_CLK_GATE0, 6);
+AXG_AO_GATE(ir_out, AO_CLK_GATE0, 7);
+AXG_AO_GATE(saradc, AO_CLK_GATE0, 8);
+AXG_AO_GATE(mailbox, AO_CLK_GATE0_SP, 0);
+AXG_AO_GATE(m3, AO_CLK_GATE0_SP, 1);
+AXG_AO_GATE(ahb_sram, AO_CLK_GATE0_SP, 2);
+AXG_AO_GATE(rti, AO_CLK_GATE0_SP, 3);
+AXG_AO_GATE(m4_fclk, AO_CLK_GATE0_SP, 4);
+AXG_AO_GATE(m4_hclk, AO_CLK_GATE0_SP, 5);
+
+static struct clk_regmap g12a_aoclk_cts_oscin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = AO_RTI_PWR_CNTL_REG0,
+ .bit_idx = 14,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_oscin",
+ .ops = &clk_regmap_gate_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal" },
+ .num_parents = 1,
+ },
+};
+
+static const struct meson_clk_dualdiv_param g12a_32k_div_table[] = {
+ {
+ .dual = 1,
+ .n1 = 733,
+ .m1 = 8,
+ .n2 = 732,
+ .m2 = 11,
+ }, {}
+};
+
+/* 32k_by_oscin clock */
+
+static struct clk_regmap g12a_aoclk_32k_by_oscin_pre = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = AO_RTC_ALT_CLK_CNTL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_32k_by_oscin_pre",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cts_oscin" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_32k_by_oscin_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = AO_RTC_ALT_CLK_CNTL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = AO_RTC_ALT_CLK_CNTL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = AO_RTC_ALT_CLK_CNTL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = AO_RTC_ALT_CLK_CNTL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = AO_RTC_ALT_CLK_CNTL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = g12a_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_32k_by_oscin_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_pre" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_32k_by_oscin_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_RTC_ALT_CLK_CNTL1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_32k_by_oscin_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_div",
+ "g12a_ao_32k_by_oscin_pre" },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_32k_by_oscin = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = AO_RTC_ALT_CLK_CNTL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_32k_by_oscin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* cec clock */
+
+static struct clk_regmap g12a_aoclk_cec_pre = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = AO_CEC_CLK_CNTL_REG0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_cec_pre",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cts_oscin" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_cec_div = {
+ .data = &(struct meson_clk_dualdiv_data){
+ .n1 = {
+ .reg_off = AO_CEC_CLK_CNTL_REG0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = AO_CEC_CLK_CNTL_REG0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = AO_CEC_CLK_CNTL_REG1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = AO_CEC_CLK_CNTL_REG1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = AO_CEC_CLK_CNTL_REG0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = g12a_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_cec_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_names = (const char *[]){ "g12a_ao_cec_pre" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_cec_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_CEC_CLK_CNTL_REG1,
+ .mask = 0x1,
+ .shift = 24,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_cec_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "g12a_ao_cec_div",
+ "g12a_ao_cec_pre" },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_cec = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = AO_CEC_CLK_CNTL_REG0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_cec",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "g12a_ao_cec_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_cts_rtc_oscin = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_RTI_PWR_CNTL_REG0,
+ .mask = 0x1,
+ .shift = 10,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_cts_rtc_oscin",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "g12a_ao_32k_by_oscin",
+ IN_PREFIX "ext_32k-0" },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_clk81 = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_RTI_PWR_CNTL_REG0,
+ .mask = 0x1,
+ .shift = 8,
+ .flags = CLK_MUX_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_clk81",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "mpeg-clk",
+ "g12a_ao_cts_rtc_oscin"},
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_saradc_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = AO_SAR_CLK,
+ .mask = 0x3,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_saradc_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "g12a_ao_clk81" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_saradc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = AO_SAR_CLK,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "g12a_ao_saradc_mux" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap g12a_aoclk_saradc_gate = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = AO_SAR_CLK,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "g12a_ao_saradc_gate",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "g12a_ao_saradc_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const unsigned int g12a_aoclk_reset[] = {
+ [RESET_AO_IR_IN] = 16,
+ [RESET_AO_UART] = 17,
+ [RESET_AO_I2C_M] = 18,
+ [RESET_AO_I2C_S] = 19,
+ [RESET_AO_SAR_ADC] = 20,
+ [RESET_AO_UART2] = 22,
+ [RESET_AO_IR_OUT] = 23,
+};
+
+static struct clk_regmap *g12a_aoclk_regmap[] = {
+ &g12a_aoclk_ahb,
+ &g12a_aoclk_ir_in,
+ &g12a_aoclk_i2c_m0,
+ &g12a_aoclk_i2c_s0,
+ &g12a_aoclk_uart,
+ &g12a_aoclk_prod_i2c,
+ &g12a_aoclk_uart2,
+ &g12a_aoclk_ir_out,
+ &g12a_aoclk_saradc,
+ &g12a_aoclk_mailbox,
+ &g12a_aoclk_m3,
+ &g12a_aoclk_ahb_sram,
+ &g12a_aoclk_rti,
+ &g12a_aoclk_m4_fclk,
+ &g12a_aoclk_m4_hclk,
+ &g12a_aoclk_cts_oscin,
+ &g12a_aoclk_32k_by_oscin_pre,
+ &g12a_aoclk_32k_by_oscin_div,
+ &g12a_aoclk_32k_by_oscin_sel,
+ &g12a_aoclk_32k_by_oscin,
+ &g12a_aoclk_cec_pre,
+ &g12a_aoclk_cec_div,
+ &g12a_aoclk_cec_sel,
+ &g12a_aoclk_cec,
+ &g12a_aoclk_cts_rtc_oscin,
+ &g12a_aoclk_clk81,
+ &g12a_aoclk_saradc_mux,
+ &g12a_aoclk_saradc_div,
+ &g12a_aoclk_saradc_gate,
+};
+
+static const struct clk_hw_onecell_data g12a_aoclk_onecell_data = {
+ .hws = {
+ [CLKID_AO_AHB] = &g12a_aoclk_ahb.hw,
+ [CLKID_AO_IR_IN] = &g12a_aoclk_ir_in.hw,
+ [CLKID_AO_I2C_M0] = &g12a_aoclk_i2c_m0.hw,
+ [CLKID_AO_I2C_S0] = &g12a_aoclk_i2c_s0.hw,
+ [CLKID_AO_UART] = &g12a_aoclk_uart.hw,
+ [CLKID_AO_PROD_I2C] = &g12a_aoclk_prod_i2c.hw,
+ [CLKID_AO_UART2] = &g12a_aoclk_uart2.hw,
+ [CLKID_AO_IR_OUT] = &g12a_aoclk_ir_out.hw,
+ [CLKID_AO_SAR_ADC] = &g12a_aoclk_saradc.hw,
+ [CLKID_AO_MAILBOX] = &g12a_aoclk_mailbox.hw,
+ [CLKID_AO_M3] = &g12a_aoclk_m3.hw,
+ [CLKID_AO_AHB_SRAM] = &g12a_aoclk_ahb_sram.hw,
+ [CLKID_AO_RTI] = &g12a_aoclk_rti.hw,
+ [CLKID_AO_M4_FCLK] = &g12a_aoclk_m4_fclk.hw,
+ [CLKID_AO_M4_HCLK] = &g12a_aoclk_m4_hclk.hw,
+ [CLKID_AO_CLK81] = &g12a_aoclk_clk81.hw,
+ [CLKID_AO_SAR_ADC_SEL] = &g12a_aoclk_saradc_mux.hw,
+ [CLKID_AO_SAR_ADC_DIV] = &g12a_aoclk_saradc_div.hw,
+ [CLKID_AO_SAR_ADC_CLK] = &g12a_aoclk_saradc_gate.hw,
+ [CLKID_AO_CTS_OSCIN] = &g12a_aoclk_cts_oscin.hw,
+ [CLKID_AO_32K_PRE] = &g12a_aoclk_32k_by_oscin_pre.hw,
+ [CLKID_AO_32K_DIV] = &g12a_aoclk_32k_by_oscin_div.hw,
+ [CLKID_AO_32K_SEL] = &g12a_aoclk_32k_by_oscin_sel.hw,
+ [CLKID_AO_32K] = &g12a_aoclk_32k_by_oscin.hw,
+ [CLKID_AO_CEC_PRE] = &g12a_aoclk_cec_pre.hw,
+ [CLKID_AO_CEC_DIV] = &g12a_aoclk_cec_div.hw,
+ [CLKID_AO_CEC_SEL] = &g12a_aoclk_cec_sel.hw,
+ [CLKID_AO_CEC] = &g12a_aoclk_cec.hw,
+ [CLKID_AO_CTS_RTC_OSCIN] = &g12a_aoclk_cts_rtc_oscin.hw,
+ },
+ .num = NR_CLKS,
+};
+
+static const struct meson_aoclk_input g12a_aoclk_inputs[] = {
+ { .name = "xtal", .required = true },
+ { .name = "mpeg-clk", .required = true },
+ { .name = "ext-32k-0", .required = false },
+};
+
+static const struct meson_aoclk_data g12a_aoclkc_data = {
+ .reset_reg = AO_RTI_GEN_CNTL_REG0,
+ .num_reset = ARRAY_SIZE(g12a_aoclk_reset),
+ .reset = g12a_aoclk_reset,
+ .num_clks = ARRAY_SIZE(g12a_aoclk_regmap),
+ .clks = g12a_aoclk_regmap,
+ .hw_data = &g12a_aoclk_onecell_data,
+ .inputs = g12a_aoclk_inputs,
+ .num_inputs = ARRAY_SIZE(g12a_aoclk_inputs),
+ .input_prefix = IN_PREFIX,
+};
+
+static const struct of_device_id g12a_aoclkc_match_table[] = {
+ {
+ .compatible = "amlogic,meson-g12a-aoclkc",
+ .data = &g12a_aoclkc_data,
+ },
+ { }
+};
+
+static struct platform_driver g12a_aoclkc_driver = {
+ .probe = meson_aoclkc_probe,
+ .driver = {
+ .name = "g12a-aoclkc",
+ .of_match_table = g12a_aoclkc_match_table,
+ },
+};
+
+builtin_platform_driver(g12a_aoclkc_driver);
diff --git a/drivers/clk/meson/g12a-aoclk.h b/drivers/clk/meson/g12a-aoclk.h
new file mode 100644
index 000000000000..04b0d5506641
--- /dev/null
+++ b/drivers/clk/meson/g12a-aoclk.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef __G12A_AOCLKC_H
+#define __G12A_AOCLKC_H
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-aoclkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_AO_SAR_ADC_SEL 16
+#define CLKID_AO_SAR_ADC_DIV 17
+#define CLKID_AO_CTS_OSCIN 19
+#define CLKID_AO_32K_PRE 20
+#define CLKID_AO_32K_DIV 21
+#define CLKID_AO_32K_SEL 22
+#define CLKID_AO_CEC_PRE 24
+#define CLKID_AO_CEC_DIV 25
+#define CLKID_AO_CEC_SEL 26
+
+#define NR_CLKS 29
+
+#include <dt-bindings/clock/g12a-aoclkc.h>
+#include <dt-bindings/reset/g12a-aoclkc.h>
+
+#endif /* __G12A_AOCLKC_H */
--
2.20.1
\
 
 \ /
  Last update: 2019-02-12 17:29    [W:0.053 / U:1.412 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site