lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 2/3] HYPERV/IOMMU: Add Hyper-V stub IOMMU driver
On Fri, Feb 8, 2019 at 1:15 AM Vitaly Kuznetsov <vkuznets@redhat.com> wrote:
>
> lantianyu1986@gmail.com writes:
>
> > From: Lan Tianyu <Tianyu.Lan@microsoft.com>
> >
> > On the bare metal, enabling X2APIC mode requires interrupt remapping
> > function which helps to deliver irq to cpu with 32-bit APIC ID.
> > Hyper-V doesn't provide interrupt remapping function so far and Hyper-V
> > MSI protocol already supports to deliver interrupt to the CPU whose
> > virtual processor index is more than 255. IO-APIC interrupt still has
> > 8-bit APIC ID limitation.
> >
> > This patch is to add Hyper-V stub IOMMU driver in order to enable
> > X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC
> > interrupt remapping capability when X2APIC mode is available. Otherwise,
> > it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity
> > and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID.
> >
> > Define 24 IO-APIC remapping entries because Hyper-V only expose one
> > single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec(
> > https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf).
> >
> > Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
> > ---
> > Change since v2:
> > - Improve comment about why save IO-APIC entry in the irq chip data.
> > - Some code improvement.
> > - Improve statement in the IOMMU Kconfig.
> >
> > Change since v1:
> > - Remove unused pr_fmt
> > - Make ioapic_ir_domain as static variable
> > - Remove unused variables cfg and entry in the hyperv_irq_remapping_alloc()
> > - Fix comments
> > ---
> > drivers/iommu/Kconfig | 8 ++
> > drivers/iommu/Makefile | 1 +
> > drivers/iommu/hyperv-iommu.c | 194 ++++++++++++++++++++++++++++++++++++++++++
> > drivers/iommu/irq_remapping.c | 3 +
> > drivers/iommu/irq_remapping.h | 1 +
> > 5 files changed, 207 insertions(+)
> > create mode 100644 drivers/iommu/hyperv-iommu.c
> >
> > diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> > index 45d7021..6090935 100644
> > --- a/drivers/iommu/Kconfig
> > +++ b/drivers/iommu/Kconfig
> > @@ -437,4 +437,12 @@ config QCOM_IOMMU
> > help
> > Support for IOMMU on certain Qualcomm SoCs.
> >
> > +config HYPERV_IOMMU
> > + bool "Hyper-V x2APIC IRQ Handling"
> > + depends on HYPERV
> > + select IOMMU_API
> > + help
> > + Stub IOMMU driver to handle IRQs as to allow Hyper-V Linux
> > + guests to run with x2APIC mode enabled.
> > +
> > endif # IOMMU_SUPPORT
> > diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
> > index a158a68..8c71a15 100644
> > --- a/drivers/iommu/Makefile
> > +++ b/drivers/iommu/Makefile
> > @@ -32,3 +32,4 @@ obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
> > obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o
> > obj-$(CONFIG_S390_IOMMU) += s390-iommu.o
> > obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o
> > +obj-$(CONFIG_HYPERV_IOMMU) += hyperv-iommu.o
> > diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> > new file mode 100644
> > index 0000000..d8572c5
> > --- /dev/null
> > +++ b/drivers/iommu/hyperv-iommu.c
> > @@ -0,0 +1,194 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +/*
> > + * Hyper-V stub IOMMU driver.
> > + *
> > + * Copyright (C) 2019, Microsoft, Inc.
> > + *
> > + * Author : Lan Tianyu <Tianyu.Lan@microsoft.com>
> > + */
> > +
> > +#include <linux/types.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +#include <linux/iommu.h>
> > +#include <linux/module.h>
> > +
> > +#include <asm/hw_irq.h>
> > +#include <asm/io_apic.h>
> > +#include <asm/irq_remapping.h>
> > +#include <asm/hypervisor.h>
> > +
> > +#include "irq_remapping.h"
> > +
> > +#ifdef CONFIG_IRQ_REMAP
> > +
> > +/*
> > + * According 82093AA IO-APIC spec , IO APIC has a 24-entry Interrupt
> > + * Redirection Table. Hyper-V exposes one single IO-APIC and so define
> > + * 24 IO APIC remmapping entries.
> > + */
> > +#define IOAPIC_REMAPPING_ENTRY 24
> > +
> > +static cpumask_t ioapic_max_cpumask = { CPU_BITS_NONE };
> > +static struct irq_domain *ioapic_ir_domain;
> > +
> > +static int hyperv_ir_set_affinity(struct irq_data *data,
> > + const struct cpumask *mask, bool force)
> > +{
> > + struct irq_data *parent = data->parent_data;
> > + struct irq_cfg *cfg = irqd_cfg(data);
> > + struct IO_APIC_route_entry *entry;
> > + int ret;
> > +
> > + /* Return error If new irq affinity is out of ioapic_max_cpumask. */
> > + if (!cpumask_subset(mask, &ioapic_max_cpumask))
> > + return -EINVAL;
> > +
> > + ret = parent->chip->irq_set_affinity(parent, mask, force);
> > + if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
> > + return ret;
> > +
> > + entry = data->chip_data;
> > + entry->dest = cfg->dest_apicid;
> > + entry->vector = cfg->vector;
> > + send_cleanup_vector(cfg);
> > +
> > + return 0;
> > +}
> > +
> > +static struct irq_chip hyperv_ir_chip = {
> > + .name = "HYPERV-IR",
> > + .irq_ack = apic_ack_irq,
> > + .irq_set_affinity = hyperv_ir_set_affinity,
> > +};
> > +
> > +static int hyperv_irq_remapping_alloc(struct irq_domain *domain,
> > + unsigned int virq, unsigned int nr_irqs,
> > + void *arg)
> > +{
> > + struct irq_alloc_info *info = arg;
> > + struct irq_data *irq_data;
> > + struct irq_desc *desc;
> > + int ret = 0;
> > +
> > + if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
> > + return -EINVAL;
> > +
> > + ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> > + if (ret < 0)
> > + return ret;
> > +
> > + irq_data = irq_domain_get_irq_data(domain, virq);
> > + if (!irq_data) {
> > + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> > + return -EINVAL;
> > + }
> > +
> > + irq_data->chip = &hyperv_ir_chip;
> > +
> > + /*
> > + * If there is interrupt remapping function of IOMMU, setting irq
> > + * affinity only needs to change IRTE of IOMMU. But Hyper-V doesn't
> > + * support interrupt remapping function, setting irq affinity of IO-APIC
> > + * interrupts still needs to change IO-APIC registers. But ioapic_
> > + * configure_entry() will ignore value of cfg->vector and cfg->
> > + * dest_apicid when IO-APIC's parent irq domain is not the vector
> > + * domain.(See ioapic_configure_entry()) In order to setting vector
> > + * and dest_apicid to IO-APIC register, IO-APIC entry pointer is saved
> > + * in the chip_data and hyperv_irq_remapping_activate()/hyperv_ir_set_
> > + * affinity() set vector and dest_apicid directly into IO-APIC entry.
> > + */
> > + irq_data->chip_data = info->ioapic_entry;
> > +
> > + /*
> > + * Hypver-V IO APIC irq affinity should be in the scope of
> > + * ioapic_max_cpumask because no irq remapping support.
> > + */
> > + desc = irq_data_to_desc(irq_data);
> > + cpumask_copy(desc->irq_common_data.affinity, &ioapic_max_cpumask);
> > +
> > + return 0;
> > +}
> > +
> > +static void hyperv_irq_remapping_free(struct irq_domain *domain,
> > + unsigned int virq, unsigned int nr_irqs)
> > +{
> > + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> > +}
> > +
> > +static int hyperv_irq_remapping_activate(struct irq_domain *domain,
> > + struct irq_data *irq_data, bool reserve)
> > +{
> > + struct irq_cfg *cfg = irqd_cfg(irq_data);
> > + struct IO_APIC_route_entry *entry = irq_data->chip_data;
> > +
> > + entry->dest = cfg->dest_apicid;
> > + entry->vector = cfg->vector;
> > +
> > + return 0;
> > +}
> > +
> > +static struct irq_domain_ops hyperv_ir_domain_ops = {
> > + .alloc = hyperv_irq_remapping_alloc,
> > + .free = hyperv_irq_remapping_free,
> > + .activate = hyperv_irq_remapping_activate,
> > +};
> > +
> > +static int __init hyperv_prepare_irq_remapping(void)
> > +{
> > + struct fwnode_handle *fn;
> > + int i;
> > +
> > + if (!hypervisor_is_type(x86_hyper_type) ||
>
> I think this should be
>
> if (hypervisor_is_type(X86_HYPER_MS_HYPERV))

Sorry for oops and will fix in the next version. Thanks.

>
> > + !x2apic_supported())
> > + return -ENODEV;
> > +
> > + fn = irq_domain_alloc_named_id_fwnode("HYPERV-IR", 0);
> > + if (!fn)
> > + return -ENOMEM;
> > +
> > + ioapic_ir_domain =
> > + irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
> > + 0, IOAPIC_REMAPPING_ENTRY, fn,
> > + &hyperv_ir_domain_ops, NULL);
> > +
> > + irq_domain_free_fwnode(fn);
> > +
> > + /*
> > + * Hyper-V doesn't provide irq remapping function for
> > + * IO-APIC and so IO-APIC only accepts 8-bit APIC ID.
> > + * Cpu's APIC ID is read from ACPI MADT table and APIC IDs
> > + * in the MADT table on Hyper-v are sorted monotonic increasingly.
> > + * APIC ID reflects cpu topology. There maybe some APIC ID
> > + * gaps when cpu number in a socket is not power of two. Prepare
> > + * max cpu affinity for IOAPIC irqs. Scan cpu 0-255 and set cpu
> > + * into ioapic_max_cpumask if its APIC ID is less than 256.
> > + */
> > + for (i = 0; i < 256; i++)
> > + if (cpu_physical_id(i) < 256)
> > + cpumask_set_cpu(i, &ioapic_max_cpumask);
> > +
> > + return 0;
> > +}
> > +
> > +static int __init hyperv_enable_irq_remapping(void)
> > +{
> > + return IRQ_REMAP_X2APIC_MODE;
> > +}
> > +
> > +static struct irq_domain *hyperv_get_ir_irq_domain(struct irq_alloc_info *info)
> > +{
> > + if (info->type == X86_IRQ_ALLOC_TYPE_IOAPIC)
> > + return ioapic_ir_domain;
> > + else
> > + return NULL;
> > +}
> > +
> > +struct irq_remap_ops hyperv_irq_remap_ops = {
> > + .prepare = hyperv_prepare_irq_remapping,
> > + .enable = hyperv_enable_irq_remapping,
> > + .get_ir_irq_domain = hyperv_get_ir_irq_domain,
> > +};
> > +
> > +#endif
> > diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
> > index b94ebd4..81cf290 100644
> > --- a/drivers/iommu/irq_remapping.c
> > +++ b/drivers/iommu/irq_remapping.c
> > @@ -103,6 +103,9 @@ int __init irq_remapping_prepare(void)
> > else if (IS_ENABLED(CONFIG_AMD_IOMMU) &&
> > amd_iommu_irq_ops.prepare() == 0)
> > remap_ops = &amd_iommu_irq_ops;
> > + else if (IS_ENABLED(CONFIG_HYPERV_IOMMU) &&
> > + hyperv_irq_remap_ops.prepare() == 0)
> > + remap_ops = &hyperv_irq_remap_ops;
> > else
> > return -ENOSYS;
> >
> > diff --git a/drivers/iommu/irq_remapping.h b/drivers/iommu/irq_remapping.h
> > index 0afef6e..f8609e9 100644
> > --- a/drivers/iommu/irq_remapping.h
> > +++ b/drivers/iommu/irq_remapping.h
> > @@ -64,6 +64,7 @@ struct irq_remap_ops {
> >
> > extern struct irq_remap_ops intel_irq_remap_ops;
> > extern struct irq_remap_ops amd_iommu_irq_ops;
> > +extern struct irq_remap_ops hyperv_irq_remap_ops;
> >
> > #else /* CONFIG_IRQ_REMAP */
>
> --
> Vitaly



--
Best regards
Tianyu Lan

\
 
 \ /
  Last update: 2019-02-11 09:20    [W:0.766 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site