lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 17/22] ASoC: samsung: odroid: Add support for secondary CPU DAI
On Thu, 7 Feb 2019 at 18:01, Sylwester Nawrocki <s.nawrocki@samsung.com> wrote:
>
> This patch adds DPCM links in order to support the secondary I2S interface.
> For the secondary PCM interface to be actually available one more entry
> should be added to the sound-dai property in sound/cpu node in DT.
> The changes in driver are done in a way so we are backwards compatible with
> existing DTS/DTB, i.e. if the cpu sound-dai property contains only one entry
> only one PCM will be registered.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> sound/soc/samsung/odroid.c | 132 +++++++++++++++++++++++++++----------
> 1 file changed, 96 insertions(+), 36 deletions(-)
>
> diff --git a/sound/soc/samsung/odroid.c b/sound/soc/samsung/odroid.c
> index e7b371b07230..bab61e8278a0 100644
> --- a/sound/soc/samsung/odroid.c
> +++ b/sound/soc/samsung/odroid.c
> @@ -7,6 +7,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/clk-provider.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/module.h>
> @@ -17,21 +18,24 @@
>
> struct odroid_priv {
> struct snd_soc_card card;
> - struct snd_soc_dai_link dai_link;
> -
> struct clk *clk_i2s_bus;
> struct clk *sclk_i2s;
> };
>
> -static int odroid_card_startup(struct snd_pcm_substream *substream)
> +static int odroid_card_fe_startup(struct snd_pcm_substream *substream)
> {
> struct snd_pcm_runtime *runtime = substream->runtime;
>
> snd_pcm_hw_constraint_single(runtime, SNDRV_PCM_HW_PARAM_CHANNELS, 2);
> +
> return 0;
> }
>
> -static int odroid_card_hw_params(struct snd_pcm_substream *substream,
> +static const struct snd_soc_ops odroid_card_fe_ops = {
> + .startup = odroid_card_fe_startup,
> +};
> +
> +static int odroid_card_be_hw_params(struct snd_pcm_substream *substream,
> struct snd_pcm_hw_params *params)
> {
> struct snd_soc_pcm_runtime *rtd = substream->private_data;
> @@ -86,19 +90,56 @@ static int odroid_card_hw_params(struct snd_pcm_substream *substream,
> return 0;
> }
>
> -static const struct snd_soc_ops odroid_card_ops = {
> - .startup = odroid_card_startup,
> - .hw_params = odroid_card_hw_params,
> +static const struct snd_soc_ops odroid_card_be_ops = {
> + .hw_params = odroid_card_be_hw_params,
> +};
> +
> +static struct snd_soc_dai_link odroid_card_dais[] = {
> + {
> + /* Primary FE <-> BE link */
> + .codec_name = "snd-soc-dummy",
> + .codec_dai_name = "snd-soc-dummy-dai",
> + .ops = &odroid_card_fe_ops,
> + .name = "Primary",
> + .stream_name = "Primary",
> + .platform_name = "3830000.i2s",

Why exposing address as platform_name? I think it is not used so how
about some friendlier name?

> + .dynamic = 1,
> + .dpcm_playback = 1,
> + }, {
> + /* BE <-> CODECs link */
> + .name = "I2S Mixer",
> + .cpu_name = "snd-soc-dummy",
> + .cpu_dai_name = "snd-soc-dummy-dai",
> + .platform_name = "snd-soc-dummy",
> + .ops = &odroid_card_be_ops,
> + .no_pcm = 1,
> + .dpcm_playback = 1,
> + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
> + SND_SOC_DAIFMT_CBS_CFS,
> + }, {
> + /* Secondary FE <-> BE link */
> + .playback_only = 1,
> + .codec_name = "snd-soc-dummy",
> + .codec_dai_name = "snd-soc-dummy-dai",
> + .ops = &odroid_card_fe_ops,
> + .name = "Secondary",
> + .stream_name = "Secondary",
> + .platform_name = "samsung-i2s-sec",
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + }
> };
>
> +

Unneeded new line.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2019-02-11 14:58    [W:0.614 / U:9.888 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site