lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/8] lantiq_etop: pass struct device to DMA API functions
Date
The DMA API generally relies on a struct device to work properly, and
only barely works without one for legacy reasons. Pass the easily
available struct device from the platform_device to remedy this.

Note this driver seems to lack dma_unmap_* calls entirely, but fixing
that is left for another time.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/net/ethernet/lantiq_etop.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 32ac9045cdae..f9bb890733b5 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -112,10 +112,12 @@ struct ltq_etop_priv {
static int
ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
{
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+
ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
if (!ch->skb[ch->dma.desc])
return -ENOMEM;
- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev,
ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
DMA_FROM_DEVICE);
ch->dma.desc_base[ch->dma.desc].addr =
@@ -487,7 +489,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
netif_trans_update(dev);

spin_lock_irqsave(&priv->lock, flags);
- desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+ desc->addr = ((unsigned int) dma_map_single(&priv->pdev->dev, skb->data, len,
DMA_TO_DEVICE)) - byte_offset;
wmb();
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
--
2.20.1
\
 
 \ /
  Last update: 2019-02-11 14:22    [W:0.049 / U:23.688 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site