lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] staging: iio: ad5933: move out of staging
On 02/11, Jonathan Cameron wrote:
> On Mon, 11 Feb 2019 13:43:11 -0200
> Marcelo Schmitt <marcelo.schmitt1@gmail.com> wrote:
>
> > Move ad5933 impedance-analyzer driver from staging to mainline.
> >
> > The ad5933 is a high precision impedance converter system
> > solution that combines an on-board frequency generator with an
> > analog-to-digital converter (ADC). This driver was designed to be
> > compatible with both ad5933 and ad5934 chips.
> >
> > Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
> Hi Marcelo,
>
> Mostly this is fine. There are a few tweaks inline. However
> it has a fairly extensive non standard ABI. That needs documenting
> and discussing before we move this out of staging.
>
> Please propose a new ABI doc, probably device specific for now...
>
> Documentation/ABI/testing/sysfs-bus-iio-ad5933
>
> to document what those elements actually do...
> Superficially they look sensible, but we need units etc to be
> clearly described. It would also be worth adding some description
> in comments for how the interface works.
>
> Thanks,
>
> Jonathan
>

Hi Jonathan,

Thanks for the advise. I'll work on the requested docs and changes.

Best reguards,

Marcelo

> > ---
> > drivers/iio/impedance-analyzer/Kconfig | 18 +
> > drivers/iio/impedance-analyzer/Makefile | 5 +
> > drivers/iio/impedance-analyzer/ad5933.c | 810 ++++++++++++++++++
> > .../staging/iio/impedance-analyzer/Kconfig | 18 -
> > .../staging/iio/impedance-analyzer/Makefile | 5 -
> > .../staging/iio/impedance-analyzer/ad5933.c | 809 -----------------
> > 6 files changed, 833 insertions(+), 832 deletions(-)
> > create mode 100644 drivers/iio/impedance-analyzer/Kconfig
> > create mode 100644 drivers/iio/impedance-analyzer/Makefile
> > create mode 100644 drivers/iio/impedance-analyzer/ad5933.c
> > delete mode 100644 drivers/staging/iio/impedance-analyzer/Kconfig
> > delete mode 100644 drivers/staging/iio/impedance-analyzer/Makefile
> > delete mode 100644 drivers/staging/iio/impedance-analyzer/ad5933.c
> >
> > diff --git a/drivers/iio/impedance-analyzer/Kconfig b/drivers/iio/impedance-analyzer/Kconfig
> > new file mode 100644
> > index 000000000000..dd97b6bb3fd0
> > --- /dev/null
> > +++ b/drivers/iio/impedance-analyzer/Kconfig
> > @@ -0,0 +1,18 @@
> > +#
> > +# Impedance Converter, Network Analyzer drivers
> > +#
> > +menu "Network Analyzer, Impedance Converters"
> > +
> > +config AD5933
> > + tristate "Analog Devices AD5933, AD5934 driver"
> > + depends on I2C
> > + select IIO_BUFFER
> > + select IIO_KFIFO_BUF
> > + help
> > + Say yes here to build support for Analog Devices Impedance Converter,
> > + Network Analyzer, AD5933/4, provides direct access via sysfs.
>
> This is rather more limited than the driver actually is.
> Has a chardev based interface for example. I'd just drop
> the last bit about sysfs as it implies false limitations.
>
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called ad5933.
> > +
> > +endmenu
> > diff --git a/drivers/iio/impedance-analyzer/Makefile b/drivers/iio/impedance-analyzer/Makefile
> > new file mode 100644
> > index 000000000000..7604d786583e
> > --- /dev/null
> > +++ b/drivers/iio/impedance-analyzer/Makefile
> > @@ -0,0 +1,5 @@
> > +#
> > +# Makefile for Impedance Converter, Network Analyzer drivers
> > +#
> > +
> > +obj-$(CONFIG_AD5933) += ad5933.o
> > diff --git a/drivers/iio/impedance-analyzer/ad5933.c b/drivers/iio/impedance-analyzer/ad5933.c
> > new file mode 100644
> > index 000000000000..839bc30682e4
> > --- /dev/null
> > +++ b/drivers/iio/impedance-analyzer/ad5933.c
> > @@ -0,0 +1,810 @@
> > +/*
> > + * AD5933 AD5934 Impedance Converter, Network Analyzer
> > + *
> > + * Copyright 2011 Analog Devices Inc.
> > + *
> > + * Licensed under the GPL-2.
> SPDX preferred.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/err.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/types.h>
> > +#include <linux/sysfs.h>
> > +
> > +#include <linux/iio/buffer.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/kfifo_buf.h>
> > +#include <linux/iio/sysfs.h>
> > +
> > +#include <linux/regulator/consumer.h>
> > +
> > +/* AD5933/AD5934 Registers */
> > +#define AD5933_REG_CONTROL_HB 0x80 /* R/W, 1 byte */
> > +#define AD5933_REG_CONTROL_LB 0x81 /* R/W, 1 byte */
> > +#define AD5933_REG_FREQ_START 0x82 /* R/W, 3 bytes */
> > +#define AD5933_REG_FREQ_INC 0x85 /* R/W, 3 bytes */
> > +#define AD5933_REG_INC_NUM 0x88 /* R/W, 2 bytes, 9 bit */
> > +#define AD5933_REG_SETTLING_CYCLES 0x8A /* R/W, 2 bytes */
> > +#define AD5933_REG_STATUS 0x8F /* R, 1 byte */
> > +#define AD5933_REG_TEMP_DATA 0x92 /* R, 2 bytes*/
> > +#define AD5933_REG_REAL_DATA 0x94 /* R, 2 bytes*/
> > +#define AD5933_REG_IMAG_DATA 0x96 /* R, 2 bytes*/
> > +
> > +/* AD5933_REG_CONTROL_HB Bits */
> > +#define AD5933_CTRL_INIT_START_FREQ (0x1 << 4)
> > +#define AD5933_CTRL_START_SWEEP (0x2 << 4)
> > +#define AD5933_CTRL_INC_FREQ (0x3 << 4)
> > +#define AD5933_CTRL_REPEAT_FREQ (0x4 << 4)
> > +#define AD5933_CTRL_MEASURE_TEMP (0x9 << 4)
> > +#define AD5933_CTRL_POWER_DOWN (0xA << 4)
> > +#define AD5933_CTRL_STANDBY (0xB << 4)
> > +
> > +#define AD5933_CTRL_RANGE_2000mVpp (0x0 << 1)
> > +#define AD5933_CTRL_RANGE_200mVpp (0x1 << 1)
> > +#define AD5933_CTRL_RANGE_400mVpp (0x2 << 1)
> > +#define AD5933_CTRL_RANGE_1000mVpp (0x3 << 1)
> > +#define AD5933_CTRL_RANGE(x) ((x) << 1)
> > +
> > +#define AD5933_CTRL_PGA_GAIN_1 (0x1 << 0)
> > +#define AD5933_CTRL_PGA_GAIN_5 (0x0 << 0)
> > +
> > +/* AD5933_REG_CONTROL_LB Bits */
> > +#define AD5933_CTRL_RESET (0x1 << 4)
> > +#define AD5933_CTRL_INT_SYSCLK (0x0 << 3)
> > +#define AD5933_CTRL_EXT_SYSCLK (0x1 << 3)
> > +
> > +/* AD5933_REG_STATUS Bits */
> > +#define AD5933_STAT_TEMP_VALID (0x1 << 0)
> > +#define AD5933_STAT_DATA_VALID (0x1 << 1)
> > +#define AD5933_STAT_SWEEP_DONE (0x1 << 2)
> > +
> > +/* I2C Block Commands */
> > +#define AD5933_I2C_BLOCK_WRITE 0xA0
> > +#define AD5933_I2C_BLOCK_READ 0xA1
> > +#define AD5933_I2C_ADDR_POINTER 0xB0
> > +
> > +/* Device Specs */
> > +#define AD5933_INT_OSC_FREQ_Hz 16776000
> > +#define AD5933_MAX_OUTPUT_FREQ_Hz 100000
> > +#define AD5933_MAX_RETRIES 100
> > +
> > +#define AD5933_OUT_RANGE 1
> > +#define AD5933_OUT_RANGE_AVAIL 2
> > +#define AD5933_OUT_SETTLING_CYCLES 3
> > +#define AD5933_IN_PGA_GAIN 4
> > +#define AD5933_IN_PGA_GAIN_AVAIL 5
> > +#define AD5933_FREQ_POINTS 6
> > +
> > +#define AD5933_POLL_TIME_ms 10
> > +#define AD5933_INIT_EXCITATION_TIME_ms 100
> > +
> > +struct ad5933_state {
> > + struct i2c_client *client;
> > + struct regulator *reg;
> > + struct clk *mclk;
> > + struct delayed_work work;
> > + struct mutex lock; /* Protect sensor state */
> > + unsigned long mclk_hz;
> > + unsigned char ctrl_hb;
> > + unsigned char ctrl_lb;
> > + unsigned int range_avail[4];
> > + unsigned short vref_mv;
> > + unsigned short settling_cycles;
> > + unsigned short freq_points;
> > + unsigned int freq_start;
> > + unsigned int freq_inc;
> > + unsigned int state;
> > + unsigned int poll_time_jiffies;
> > +};
> > +
> > +#define AD5933_CHANNEL(_type, _extend_name, _info_mask_separate, _address, \
> > + _scan_index, _realbits) { \
> > + .type = (_type), \
> > + .extend_name = (_extend_name), \
> > + .info_mask_separate = (_info_mask_separate), \
> > + .address = (_address), \
> > + .scan_index = (_scan_index), \
> > + .scan_type = { \
> > + .sign = 's', \
> > + .realbits = (_realbits), \
> > + .storagebits = 16, \
> > + }, \
> > +}
> > +
> > +static const struct iio_chan_spec ad5933_channels[] = {
> > + AD5933_CHANNEL(IIO_TEMP, NULL, BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE), AD5933_REG_TEMP_DATA, -1, 14),
> > + /* Ring Channels */
> > + AD5933_CHANNEL(IIO_VOLTAGE, "real", 0, AD5933_REG_REAL_DATA, 0, 16),
> > + AD5933_CHANNEL(IIO_VOLTAGE, "imag", 0, AD5933_REG_IMAG_DATA, 1, 16),
> > +};
> > +
> > +static int ad5933_i2c_write(struct i2c_client *client, u8 reg, u8 len, u8 *data)
> > +{
> > + int ret;
> > +
> > + while (len--) {
> > + ret = i2c_smbus_write_byte_data(client, reg++, *data++);
> > + if (ret < 0) {
> > + dev_err(&client->dev, "I2C write error\n");
> > + return ret;
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > +static int ad5933_i2c_read(struct i2c_client *client, u8 reg, u8 len, u8 *data)
> > +{
> > + int ret;
> > +
> > + while (len--) {
> > + ret = i2c_smbus_read_byte_data(client, reg++);
> > + if (ret < 0) {
> > + dev_err(&client->dev, "I2C read error\n");
> > + return ret;
> > + }
> > + *data++ = ret;
> > + }
> > + return 0;
> > +}
> > +
> > +static int ad5933_cmd(struct ad5933_state *st, unsigned char cmd)
> > +{
> > + unsigned char dat = st->ctrl_hb | cmd;
> > +
> > + return ad5933_i2c_write(st->client,
> > + AD5933_REG_CONTROL_HB, 1, &dat);
> > +}
> > +
> > +static int ad5933_reset(struct ad5933_state *st)
> > +{
> > + unsigned char dat = st->ctrl_lb | AD5933_CTRL_RESET;
> > +
> > + return ad5933_i2c_write(st->client,
> > + AD5933_REG_CONTROL_LB, 1, &dat);
> > +}
> > +
> > +static int ad5933_wait_busy(struct ad5933_state *st, unsigned char event)
> > +{
> > + unsigned char val, timeout = AD5933_MAX_RETRIES;
> > + int ret;
> > +
> > + while (timeout--) {
> > + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &val);
> > + if (ret < 0)
> > + return ret;
> > + if (val & event)
> > + return val;
> > + cpu_relax();
> > + mdelay(1);
> > + }
> > +
> > + return -EAGAIN;
> > +}
> > +
> > +static int ad5933_set_freq(struct ad5933_state *st,
> > + unsigned int reg, unsigned long freq)
> > +{
> > + unsigned long long freqreg;
> > + union {
> > + __be32 d32;
> > + u8 d8[4];
> > + } dat;
> > +
> > + freqreg = (u64)freq * (u64)(1 << 27);
> > + do_div(freqreg, st->mclk_hz / 4);
> > +
> > + switch (reg) {
> > + case AD5933_REG_FREQ_START:
> > + st->freq_start = freq;
> > + break;
> > + case AD5933_REG_FREQ_INC:
> > + st->freq_inc = freq;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + dat.d32 = cpu_to_be32(freqreg);
> > + return ad5933_i2c_write(st->client, reg, 3, &dat.d8[1]);
> > +}
> > +
> > +static int ad5933_setup(struct ad5933_state *st)
> > +{
> > + __be16 dat;
> > + int ret;
> > +
> > + ret = ad5933_reset(st);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = ad5933_set_freq(st, AD5933_REG_FREQ_START, 10000);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = ad5933_set_freq(st, AD5933_REG_FREQ_INC, 200);
> > + if (ret < 0)
> > + return ret;
> > +
> > + st->settling_cycles = 10;
> > + dat = cpu_to_be16(st->settling_cycles);
> > +
> > + ret = ad5933_i2c_write(st->client,
> > + AD5933_REG_SETTLING_CYCLES,
> > + 2, (u8 *)&dat);
> > + if (ret < 0)
> > + return ret;
> > +
> > + st->freq_points = 100;
> > + dat = cpu_to_be16(st->freq_points);
> > +
> > + return ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, (u8 *)&dat);
> > +}
> > +
> > +static void ad5933_calc_out_ranges(struct ad5933_state *st)
> > +{
> > + int i;
> > + unsigned int normalized_3v3[4] = {1980, 198, 383, 970};
> > +
> > + for (i = 0; i < 4; i++)
> > + st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300;
> > +}
> > +
> > +/*
> > + * handles: AD5933_REG_FREQ_START and AD5933_REG_FREQ_INC
> > + */
> > +
> > +static ssize_t ad5933_show_frequency(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> > + int ret;
> > + unsigned long long freqreg;
> > + union {
> > + __be32 d32;
> > + u8 d8[4];
> > + } dat;
> > +
> > + ret = iio_device_claim_direct_mode(indio_dev);
> > + if (ret)
> > + return ret;
> > + ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]);
> > + iio_device_release_direct_mode(indio_dev);
> > + if (ret < 0)
> > + return ret;
> > +
> > + freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF;
> > +
> > + freqreg = (u64)freqreg * (u64)(st->mclk_hz / 4);
> > + do_div(freqreg, 1 << 27);
> > +
> > + return sprintf(buf, "%d\n", (int)freqreg);
> > +}
> > +
> > +static ssize_t ad5933_store_frequency(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf,
> > + size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> > + unsigned long val;
> > + int ret;
> > +
> > + ret = kstrtoul(buf, 10, &val);
> > + if (ret)
> > + return ret;
> > +
> > + if (val > AD5933_MAX_OUTPUT_FREQ_Hz)
> > + return -EINVAL;
> > +
> > + ret = iio_device_claim_direct_mode(indio_dev);
> > + if (ret)
> > + return ret;
> > + ret = ad5933_set_freq(st, this_attr->address, val);
> > + iio_device_release_direct_mode(indio_dev);
> > +
> > + return ret ? ret : len;
> > +}
> > +
> > +static IIO_DEVICE_ATTR(out_voltage0_freq_start, 0644,
> > + ad5933_show_frequency,
> > + ad5933_store_frequency,
> > + AD5933_REG_FREQ_START);
> > +
> > +static IIO_DEVICE_ATTR(out_voltage0_freq_increment, 0644,
> > + ad5933_show_frequency,
> > + ad5933_store_frequency,
> > + AD5933_REG_FREQ_INC);
> > +
> > +static ssize_t ad5933_show(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> > + int ret = 0, len = 0;
> > +
> > + mutex_lock(&st->lock);
> > + switch ((u32)this_attr->address) {
> > + case AD5933_OUT_RANGE:
> > + len = sprintf(buf, "%u\n",
> > + st->range_avail[(st->ctrl_hb >> 1) & 0x3]);
> > + break;
> > + case AD5933_OUT_RANGE_AVAIL:
> > + len = sprintf(buf, "%u %u %u %u\n", st->range_avail[0],
> > + st->range_avail[3], st->range_avail[2],
> > + st->range_avail[1]);
> > + break;
> > + case AD5933_OUT_SETTLING_CYCLES:
> > + len = sprintf(buf, "%d\n", st->settling_cycles);
> > + break;
> > + case AD5933_IN_PGA_GAIN:
> > + len = sprintf(buf, "%s\n",
> > + (st->ctrl_hb & AD5933_CTRL_PGA_GAIN_1) ?
> > + "1" : "0.2");
> > + break;
> > + case AD5933_IN_PGA_GAIN_AVAIL:
> > + len = sprintf(buf, "1 0.2\n");
> > + break;
> > + case AD5933_FREQ_POINTS:
> > + len = sprintf(buf, "%d\n", st->freq_points);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > +
> > + mutex_unlock(&st->lock);
> > + return ret ? ret : len;
> > +}
> > +
> > +static ssize_t ad5933_store(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf,
> > + size_t len)
> > +{
> > + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> > + u16 val;
> > + int i, ret = 0;
> > + __be16 dat;
> > +
> > + if (this_attr->address != AD5933_IN_PGA_GAIN) {
> > + ret = kstrtou16(buf, 10, &val);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ret = iio_device_claim_direct_mode(indio_dev);
> > + if (ret)
> > + return ret;
> > + mutex_lock(&st->lock);
> > + switch ((u32)this_attr->address) {
> > + case AD5933_OUT_RANGE:
> > + ret = -EINVAL;
> > + for (i = 0; i < 4; i++)
> > + if (val == st->range_avail[i]) {
> > + st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3);
> > + st->ctrl_hb |= AD5933_CTRL_RANGE(i);
> > + ret = ad5933_cmd(st, 0);
> > + break;
> > + }
> > + break;
> > + case AD5933_IN_PGA_GAIN:
> > + if (sysfs_streq(buf, "1")) {
> > + st->ctrl_hb |= AD5933_CTRL_PGA_GAIN_1;
> > + } else if (sysfs_streq(buf, "0.2")) {
> > + st->ctrl_hb &= ~AD5933_CTRL_PGA_GAIN_1;
> > + } else {
> > + ret = -EINVAL;
> > + break;
> > + }
> > + ret = ad5933_cmd(st, 0);
> > + break;
> > + case AD5933_OUT_SETTLING_CYCLES:
> > + val = clamp(val, (u16)0, (u16)0x7FF);
> > + st->settling_cycles = val;
> > +
> > + /* 2x, 4x handling, see datasheet */
> > + if (val > 1022)
> > + val = (val >> 2) | (3 << 9);
> > + else if (val > 511)
> > + val = (val >> 1) | (1 << 9);
> > +
> > + dat = cpu_to_be16(val);
> > + ret = ad5933_i2c_write(st->client,
> > + AD5933_REG_SETTLING_CYCLES,
> > + 2, (u8 *)&dat);
> > + break;
> > + case AD5933_FREQ_POINTS:
> > + val = clamp(val, (u16)0, (u16)511);
> > + st->freq_points = val;
> > +
> > + dat = cpu_to_be16(val);
> > + ret = ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2,
> > + (u8 *)&dat);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > +
> > + mutex_unlock(&st->lock);
> > + iio_device_release_direct_mode(indio_dev);
> > + return ret ? ret : len;
> > +}
> > +
> > +static IIO_DEVICE_ATTR(out_voltage0_scale, 0644,
> > + ad5933_show,
> > + ad5933_store,
> > + AD5933_OUT_RANGE);
> > +
> > +static IIO_DEVICE_ATTR(out_voltage0_scale_available, 0444,
> > + ad5933_show,
> > + NULL,
> > + AD5933_OUT_RANGE_AVAIL);
> > +
> > +static IIO_DEVICE_ATTR(in_voltage0_scale, 0644,
> > + ad5933_show,
> > + ad5933_store,
> > + AD5933_IN_PGA_GAIN);
> > +
> > +static IIO_DEVICE_ATTR(in_voltage0_scale_available, 0444,
> > + ad5933_show,
> > + NULL,
> > + AD5933_IN_PGA_GAIN_AVAIL);
> > +
> > +static IIO_DEVICE_ATTR(out_voltage0_freq_points, 0644,
> > + ad5933_show,
> > + ad5933_store,
> > + AD5933_FREQ_POINTS);
> > +
> > +static IIO_DEVICE_ATTR(out_voltage0_settling_cycles, 0644,
> > + ad5933_show,
> > + ad5933_store,
> > + AD5933_OUT_SETTLING_CYCLES);
> > +
> > +/* note:
> > + * ideally we would handle the scale attributes via the iio_info
> > + * (read|write)_raw methods, however this part is a untypical since we
> > + * don't create dedicated sysfs channel attributes for out0 and in0.
> > + */
>
> This could be a really old comment. I don't think there is anything
> preventing us having a channel defining these now... Just don't
> have a the raw or processed bit set.
>
> > +static struct attribute *ad5933_attributes[] = {
> > + &iio_dev_attr_out_voltage0_scale.dev_attr.attr,
> > + &iio_dev_attr_out_voltage0_scale_available.dev_attr.attr,
> > + &iio_dev_attr_out_voltage0_freq_start.dev_attr.attr,
> > + &iio_dev_attr_out_voltage0_freq_increment.dev_attr.attr,
> > + &iio_dev_attr_out_voltage0_freq_points.dev_attr.attr,
>
> There is a whole set of ABI in here that is non standard. It all
> needs documenting.
>
> > + &iio_dev_attr_out_voltage0_settling_cycles.dev_attr.attr,
> > + &iio_dev_attr_in_voltage0_scale.dev_attr.attr,
> > + &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
> > + NULL
> > +};
> > +
> > +static const struct attribute_group ad5933_attribute_group = {
> > + .attrs = ad5933_attributes,
> > +};
> > +
> > +static int ad5933_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan,
> > + int *val,
> > + int *val2,
> > + long m)
> > +{
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > + __be16 dat;
> > + int ret;
> > +
> > + switch (m) {
> > + case IIO_CHAN_INFO_RAW:
> > + ret = iio_device_claim_direct_mode(indio_dev);
> > + if (ret)
> > + return ret;
> > + ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP);
> > + if (ret < 0)
> > + goto out;
> > + ret = ad5933_wait_busy(st, AD5933_STAT_TEMP_VALID);
> > + if (ret < 0)
> > + goto out;
> > +
> > + ret = ad5933_i2c_read(st->client,
> > + AD5933_REG_TEMP_DATA,
> > + 2, (u8 *)&dat);
> > + if (ret < 0)
> > + goto out;
> > + iio_device_release_direct_mode(indio_dev);
> > + *val = sign_extend32(be16_to_cpu(dat), 13);
> > +
> > + return IIO_VAL_INT;
> > + case IIO_CHAN_INFO_SCALE:
> > + *val = 1000;
> > + *val2 = 5;
> > + return IIO_VAL_FRACTIONAL_LOG2;
> > + }
> > +
> > + return -EINVAL;
> > +out:
> > + iio_device_release_direct_mode(indio_dev);
> > + return ret;
> > +}
> > +
> > +static const struct iio_info ad5933_info = {
> > + .read_raw = ad5933_read_raw,
> > + .attrs = &ad5933_attribute_group,
> > +};
> > +
> > +static int ad5933_ring_preenable(struct iio_dev *indio_dev)
> > +{
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > + int ret;
> > +
> > + if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
> > + return -EINVAL;
> > +
> > + ret = ad5933_reset(st);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = ad5933_cmd(st, AD5933_CTRL_STANDBY);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ret = ad5933_cmd(st, AD5933_CTRL_INIT_START_FREQ);
> > + if (ret < 0)
> > + return ret;
> > +
> > + st->state = AD5933_CTRL_INIT_START_FREQ;
> > +
> > + return 0;
> > +}
> > +
> > +static int ad5933_ring_postenable(struct iio_dev *indio_dev)
> > +{
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > +
> > + /* AD5933_CTRL_INIT_START_FREQ:
> Multiline comment syntax as below.
> > + * High Q complex circuits require a long time to reach steady state.
> > + * To facilitate the measurement of such impedances, this mode allows
> > + * the user full control of the settling time requirement before
> > + * entering start frequency sweep mode where the impedance measurement
> > + * takes place. In this mode the impedance is excited with the
> > + * programmed start frequency (ad5933_ring_preenable),
> > + * but no measurement takes place.
> > + */
> > +
> > + schedule_delayed_work(&st->work,
> > + msecs_to_jiffies(AD5933_INIT_EXCITATION_TIME_ms));
> > + return 0;
> > +}
> > +
> > +static int ad5933_ring_postdisable(struct iio_dev *indio_dev)
> > +{
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > +
> > + cancel_delayed_work_sync(&st->work);
> > + return ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
> > +}
> > +
> > +static const struct iio_buffer_setup_ops ad5933_ring_setup_ops = {
> > + .preenable = ad5933_ring_preenable,
> > + .postenable = ad5933_ring_postenable,
> > + .postdisable = ad5933_ring_postdisable,
> > +};
> > +
> > +static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
> > +{
> > + struct iio_buffer *buffer;
> > +
> > + buffer = iio_kfifo_allocate();
> > + if (!buffer)
> > + return -ENOMEM;
> > +
> > + iio_device_attach_buffer(indio_dev, buffer);
> > +
> > + /* Ring buffer functions - here trigger setup related */
> > + indio_dev->setup_ops = &ad5933_ring_setup_ops;
> > +
> > + return 0;
> > +}
> > +
> > +static void ad5933_work(struct work_struct *work)
> > +{
> > + struct ad5933_state *st = container_of(work,
> > + struct ad5933_state, work.work);
> > + struct iio_dev *indio_dev = i2c_get_clientdata(st->client);
> > + __be16 buf[2];
> > + int val[2];
> > + unsigned char status;
> > + int ret;
> > +
> > + if (st->state == AD5933_CTRL_INIT_START_FREQ) {
> > + /* start sweep */
> > + ad5933_cmd(st, AD5933_CTRL_START_SWEEP);
> > + st->state = AD5933_CTRL_START_SWEEP;
> > + schedule_delayed_work(&st->work, st->poll_time_jiffies);
> > + return;
> > + }
> > +
> > + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status);
> > + if (ret)
> > + return;
> > +
> > + if (status & AD5933_STAT_DATA_VALID) {
> > + int scan_count = bitmap_weight(indio_dev->active_scan_mask,
> > + indio_dev->masklength);
> > + ret = ad5933_i2c_read(st->client,
> > + test_bit(1, indio_dev->active_scan_mask) ?
> > + AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA,
> > + scan_count * 2, (u8 *)buf);
> > + if (ret)
> > + return;
> > +
> > + if (scan_count == 2) {
> > + val[0] = be16_to_cpu(buf[0]);
> > + val[1] = be16_to_cpu(buf[1]);
> > + } else {
> > + val[0] = be16_to_cpu(buf[0]);
> > + }
> > + iio_push_to_buffers(indio_dev, val);
> > + } else {
> > + /* no data available - try again later */
> > + schedule_delayed_work(&st->work, st->poll_time_jiffies);
> > + return;
> > + }
> > +
> > + if (status & AD5933_STAT_SWEEP_DONE) {
> > + /* last sample received - power down do
> /*
> * last sample received...
> > + * nothing until the ring enable is toggled
> > + */
> > + ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
> > + } else {
> > + /* we just received a valid datum, move on to the next */
> > + ad5933_cmd(st, AD5933_CTRL_INC_FREQ);
> > + schedule_delayed_work(&st->work, st->poll_time_jiffies);
> > + }
> > +}
> > +
> > +static int ad5933_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + int ret;
> > + struct ad5933_state *st;
> > + struct iio_dev *indio_dev;
> > + unsigned long ext_clk_hz = 0;
> > +
> > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + st = iio_priv(indio_dev);
> > + i2c_set_clientdata(client, indio_dev);
> > + st->client = client;
> > +
> > + mutex_init(&st->lock);
> > +
> > + st->reg = devm_regulator_get(&client->dev, "vdd");
> > + if (IS_ERR(st->reg))
> > + return PTR_ERR(st->reg);
> > +
> > + ret = regulator_enable(st->reg);
> > + if (ret) {
> > + dev_err(&client->dev, "Failed to enable specified VDD supply\n");
> > + return ret;
> > + }
> > + ret = regulator_get_voltage(st->reg);
> > +
> > + if (ret < 0)
> > + goto error_disable_reg;
> > +
> > + st->vref_mv = ret / 1000;
> > +
> > + st->mclk = devm_clk_get(&client->dev, "mclk");
> > + if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) {
> > + ret = PTR_ERR(st->mclk);
> > + goto error_disable_reg;
> > + }
> > +
> > + if (!IS_ERR(st->mclk)) {
> > + ret = clk_prepare_enable(st->mclk);
> > + if (ret < 0)
> > + goto error_disable_reg;
> > + ext_clk_hz = clk_get_rate(st->mclk);
> > + }
> > +
> > + if (ext_clk_hz) {
> > + st->mclk_hz = ext_clk_hz;
> > + st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK;
> > + } else {
> > + st->mclk_hz = AD5933_INT_OSC_FREQ_Hz;
> > + st->ctrl_lb = AD5933_CTRL_INT_SYSCLK;
> > + }
> > +
> > + ad5933_calc_out_ranges(st);
> > + INIT_DELAYED_WORK(&st->work, ad5933_work);
> > + st->poll_time_jiffies = msecs_to_jiffies(AD5933_POLL_TIME_ms);
> > +
> > + indio_dev->dev.parent = &client->dev;
> > + indio_dev->info = &ad5933_info;
> > + indio_dev->name = id->name;
> > + indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
> > + indio_dev->channels = ad5933_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(ad5933_channels);
> > +
> > + ret = ad5933_register_ring_funcs_and_init(indio_dev);
> > + if (ret)
> > + goto error_disable_mclk;
> > +
> > + ret = ad5933_setup(st);
> > + if (ret)
> > + goto error_unreg_ring;
> > +
> > + ret = iio_device_register(indio_dev);
> > + if (ret)
> > + goto error_unreg_ring;
> > +
> > + return 0;
> > +
> > +error_unreg_ring:
> > + iio_kfifo_free(indio_dev->buffer);
> > +error_disable_mclk:
> > + clk_disable_unprepare(st->mclk);
> > +error_disable_reg:
> > + regulator_disable(st->reg);
> > +
> > + return ret;
> > +}
> > +
> > +static int ad5933_remove(struct i2c_client *client)
> > +{
> > + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> > + struct ad5933_state *st = iio_priv(indio_dev);
> > +
> > + iio_device_unregister(indio_dev);
> > + iio_kfifo_free(indio_dev->buffer);
> > + regulator_disable(st->reg);
> > + clk_disable_unprepare(st->mclk);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id ad5933_id[] = {
> > + { "ad5933", 0 },
> > + { "ad5934", 0 },
> > + {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, ad5933_id);
> > +
> > +static const struct of_device_id ad5933_of_match[] = {
> > + { .compatible = "adi,ad5933" },
> > + { .compatible = "adi,ad5934" },
> > + { },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, ad5933_of_match);
> > +
> > +static struct i2c_driver ad5933_driver = {
> > + .driver = {
> > + .name = "ad5933",
> > + .of_match_table = ad5933_of_match,
> > + },
> > + .probe = ad5933_probe,
> > + .remove = ad5933_remove,
> > + .id_table = ad5933_id,
> > +};
> > +module_i2c_driver(ad5933_driver);
> > +
> > +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> > +MODULE_DESCRIPTION("Analog Devices AD5933 Impedance Conv. Network Analyzer");
> > +MODULE_LICENSE("GPL v2");
>
>

\
 
 \ /
  Last update: 2019-02-11 22:49    [W:0.060 / U:0.356 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site