lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 5/5] i2c:ocores: checkpatch fixes
Date
On 2019-02-11 11:16, Peter Rosin wrote:
> On 2019-02-11 09:31, Federico Vaga wrote:
>> Miscellaneous style fixes from checkpatch
>>
>> Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>>
>> ---
>> drivers/i2c/busses/i2c-ocores.c | 19 ++++++++++++-------
>> 1 file changed, 12 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
>> index 5b80190..ba35d2a 100644
>> --- a/drivers/i2c/busses/i2c-ocores.c
>> +++ b/drivers/i2c/busses/i2c-ocores.c
>> @@ -182,8 +182,9 @@ static void ocores_process(struct ocores_i2c *i2c, u8 stat)
>> oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
>> goto out;
>> }
>> - } else
>> + } else {
>> msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA);
>> + }
>>
>> /* end of msg? */
>> if (i2c->pos == msg->len) {
>> @@ -202,9 +203,9 @@ static void ocores_process(struct ocores_i2c *i2c, u8 stat)
>> oc_setreg(i2c, OCI2C_DATA, addr);
>> oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START);
>> goto out;
>> - } else
>> - i2c->state = (msg->flags & I2C_M_RD)
>> - ? STATE_READ : STATE_WRITE;
>> + }
>> + i2c->state = (msg->flags & I2C_M_RD)
>> + ? STATE_READ : STATE_WRITE;
>> } else {
>> i2c->state = STATE_DONE;
>> oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP);
>> @@ -405,7 +406,8 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
>> u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL);
>>
>> /* make sure the device is disabled */
>> - oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN));
>> + ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
>> + oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>>
>> prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1;
>> prescale = clamp(prescale, 0, 0xffff);
>> @@ -462,11 +464,13 @@ MODULE_DEVICE_TABLE(of, ocores_i2c_match);
>> #ifdef CONFIG_OF
>> /* Read and write functions for the GRLIB port of the controller. Registers are
>> * 32-bit big endian and the PRELOW and PREHIGH registers are merged into one
>> - * register. The subsequent registers has their offset decreased accordingly. */
>> + * register. The subsequent registers has their offset decreased accordingly.

has -> have

offset -> offsets ??? I think?

>> + */
>
> The preferred multi-line comment styles is:

And finally, this typo is my own...

styles -> style

Cheers and sorry for replying to self,
Peter

>
> /*
> * Read...
> * ...accordingly.
> */
>
> So, please fix all issues when you are changing it to conform.
>
> Cheers,
> Peter
>
>> static u8 oc_getreg_grlib(struct ocores_i2c *i2c, int reg)
>> {
>> u32 rd;
>> int rreg = reg;
>> +
>> if (reg != OCI2C_PRELOW)
>> rreg--;
>> rd = ioread32be(i2c->base + (rreg << i2c->reg_shift));
>> @@ -480,6 +484,7 @@ static void oc_setreg_grlib(struct ocores_i2c *i2c, int reg, u8 value)
>> {
>> u32 curr, wr;
>> int rreg = reg;
>> +
>> if (reg != OCI2C_PRELOW)
>> rreg--;
>> if (reg == OCI2C_PRELOW || reg == OCI2C_PREHIGH) {
>> @@ -568,7 +573,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
>> return 0;
>> }
>> #else
>> -#define ocores_i2c_of_probe(pdev,i2c) -ENODEV
>> +#define ocores_i2c_of_probe(pdev, i2c) -ENODEV
>> #endif
>>
>> static int ocores_i2c_probe(struct platform_device *pdev)
>>
>

\
 
 \ /
  Last update: 2019-02-11 11:29    [W:0.056 / U:5.884 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site