lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] nvmem: imx-ocotp: add support for imx8mq
Date
The i.MX8MQ uses the same OCOTP block as the i.MX7D, but with
fourfold increase in fuse banks.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
drivers/nvmem/imx-ocotp.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index afb429a417fe..bcae2aed75ad 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -433,6 +433,12 @@ static const struct ocotp_params imx7d_params = {
.set_timing = imx_ocotp_set_imx7_timing,
};

+static const struct ocotp_params imx8mq_params = {
+ .nregs = 256,
+ .bank_address_words = 4,
+ .set_timing = imx_ocotp_set_imx7_timing,
+};
+
static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx6q-ocotp", .data = &imx6q_params },
{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
@@ -440,6 +446,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
{ .compatible = "fsl,imx7d-ocotp", .data = &imx7d_params },
{ .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params },
+ { .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
{ },
};
MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
--
2.20.1
\
 
 \ /
  Last update: 2019-02-11 17:51    [W:0.046 / U:1.572 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site