lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.20 308/352] bnxt_en: Disable interrupts when allocating CP rings or NQs.
Date
4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 5e66e35aab335b83d9ffb220d8a3a13986a7a60e ]

When calling firmware to allocate a CP ring or NQ, an interrupt associated
with that ring may be generated immediately before the doorbell is even
setup after the firmware call returns. When servicing the interrupt, the
driver may crash when trying to access the doorbell.

Fix it by disabling interrupt on that vector until the doorbell is
set up.

Fixes: 697197e5a173 ("bnxt_en: Re-structure doorbells.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4903,12 +4903,18 @@ static int bnxt_hwrm_ring_alloc(struct b
struct bnxt_cp_ring_info *cpr = &bnapi->cp_ring;
struct bnxt_ring_struct *ring = &cpr->cp_ring_struct;
u32 map_idx = ring->map_idx;
+ unsigned int vector;

+ vector = bp->irq_tbl[map_idx].vector;
+ disable_irq_nosync(vector);
rc = hwrm_ring_alloc_send_msg(bp, ring, type, map_idx);
- if (rc)
+ if (rc) {
+ enable_irq(vector);
goto err_out;
+ }
bnxt_set_db(bp, &cpr->cp_db, type, map_idx, ring->fw_ring_id);
bnxt_db_nq(bp, &cpr->cp_db, cpr->cp_raw_cons);
+ enable_irq(vector);
bp->grp_info[i].cp_fw_ring_id = ring->fw_ring_id;

if (!i) {

\
 
 \ /
  Last update: 2019-02-11 16:53    [W:0.799 / U:5.364 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site