lkml.org 
[lkml]   [2019]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] ARM: dts: suniv: Add dt-binding headers for F1C100s
Date
dt-binding headers for F1C100s merged now. So add them back to dtsi.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
arch/arm/boot/dts/suniv-f1c100s.dtsi | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b..953228c 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
* Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
*/

+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -82,7 +85,7 @@
compatible = "allwinner,suniv-f1c100s-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <38>, <39>, <40>;
- clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -114,8 +117,8 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 38>;
- resets = <&ccu 24>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};

@@ -125,8 +128,8 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 39>;
- resets = <&ccu 25>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};

@@ -136,8 +139,8 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 40>;
- resets = <&ccu 26>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
};
--
2.7.4
\
 
 \ /
  Last update: 2019-02-11 10:22    [W:0.093 / U:4.416 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site