lkml.org 
[lkml]   [2019]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: meson-gxbb-odroidc2: enable I2C bus B
Hi,

Le 09/02/2019 16:50, Stijn Tintel a écrit :
> The ODROID C2 has 2 I2C buses, so enable both of them.

Thanks for the change, but this I2C bus is on the 40-pin header,
until we have a way to add support for HATs/CAPEs/<whatever hooks on the header>
upstream, we prefer not enabling any functions on these pins by default.

You can, if you want add support for most functions, but "disabled" with a
proper description of pins used by these functions.

You can also maintain a set of overlay files like it's done for the
libretech-cc boards https://github.com/libre-computer-project/libretech-overlays/tree/for-4.13.y/overlays
and use them with the Armbian mainline based latest image for example.

Neil

>
> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
> ---
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 1cc9dc68ef00..ee666471a580 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -180,6 +180,12 @@
> pinctrl-names = "default";
> };
>
> +&i2c_B {
> + status = "okay";
> + pinctrl-0 = <&i2c_b_pins>;
> + pinctrl-names = "default";
> +};
> +
> &ir {
> status = "okay";
> pinctrl-0 = <&remote_input_ao_pins>;
>

\
 
 \ /
  Last update: 2019-02-10 11:57    [W:2.002 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site