lkml.org 
[lkml]   [2019]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] dt-bindings: iio: chemical: pms7003: add device tree support
Date
Add device tree support for Plantower PMS7003 particulate matter sensor.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
---
.../iio/chemical/plantower,pms7003.txt | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt

diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 000000000000..cbad95480e04
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt
@@ -0,0 +1,20 @@
+* Plantower PMS7003 particulate matter sensor
+
+Required properties:
+- compatible: must be "plantower,pms7003"
+- vcc-supply: phandle to the regulator that provides power to the sensor
+
+Optional properties:
+- set-gpios: phandle to the GPIO connected to the SET line
+- reset-gpios: phandle to the GPIO connected to the RESET line
+
+Refer to serial/slave-device.txt for generic serial attached device bindings.
+
+Example:
+
+&uart0 {
+ air-pollution-sensor {
+ vcc-supply = <&reg_vcc5v0>;
+ compatible = "plantower,pms7003";
+ };
+};
--
2.20.1
\
 
 \ /
  Last update: 2019-02-01 22:59    [W:0.591 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site