lkml.org 
[lkml]   [2019]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] PM-runtime: fix deadlock with ktime
On Fri, 1 Feb 2019 at 16:48, Vincent Guittot <vincent.guittot@linaro.org> wrote:
>
> On Fri, 1 Feb 2019 at 16:44, Biju Das <biju.das@bp.renesas.com> wrote:
> >
> > Hi Vincent,
> >
> > Thanks for the feedback. Instead of reverting. I just modified the patch like this and it fixed the issue.
> >
> > diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
> > index 4eaf166..145a182 100644
> > --- a/drivers/base/power/runtime.c
> > +++ b/drivers/base/power/runtime.c
> > @@ -66,7 +66,7 @@ static int rpm_suspend(struct device *dev, int rpmflags);
> > */
> > void update_pm_runtime_accounting(struct device *dev)
> > {
> > - u64 now = ktime_to_ns(ktime_get());
> > + u64 now = ktime_get_mono_fast_ns();
> > u64 delta;
>
> yes.
> This probably also need to be changed in another place
> (pm_runtime_enable) to be safe
> Our email have crossed. I just sent something similar

In fact after more thinking, it's probably better to revert because we
are not sure to be monotonic with ktime_get_mono_fast_ns() which means
that the time account can be negative but this not yet taken into
account. It's part of a clean up patch that was on hold while working
on previous problem

>
>
>
> >
> > regards,
> > Biju
> >
> > > -----Original Message-----
> > > From: linux-renesas-soc-owner@vger.kernel.org <linux-renesas-soc-
> > > owner@vger.kernel.org> On Behalf Of Vincent Guittot
> > > Sent: 01 February 2019 15:29
> > > To: Biju Das <biju.das@bp.renesas.com>
> > > Cc: Rafael J. Wysocki <rafael@kernel.org>; Linux PM <linux-
> > > pm@vger.kernel.org>; Linux Kernel Mailing List <linux-
> > > kernel@vger.kernel.org>; Linux ARM <linux-arm-
> > > kernel@lists.infradead.org>; Linux OMAP Mailing List <linux-
> > > omap@vger.kernel.org>; Rafael J. Wysocki <rjw@rjwysocki.net>; Ulf
> > > Hansson <ulf.hansson@linaro.org>; Geert Uytterhoeven <geert@linux-
> > > m68k.org>; Linux-Renesas <linux-renesas-soc@vger.kernel.org>
> > > Subject: Re: [PATCH v3] PM-runtime: fix deadlock with ktime
> > >
> > > On Fri, 1 Feb 2019 at 16:02, Biju Das <biju.das@bp.renesas.com> wrote:
> > > >
> > > > Hi Vincent,
> > > >
> > > > I have rebased my kernel to "next-20190201". Still I am seeing dead lock.
> > > >
> > > > Am I missing any patch?
> > >
> > > No you don't miss anything.
> > > I think that it's the opposite.
> > >
> > > Modification in time accounting in PM runtime has been queued but it has
> > > not moved (yet) to ktime_get_mono_fast_ns()
> > >
> > > Can you try to revert c669560be6c8 ("PM-runtime: Replace jiffies-based
> > > accounting with ktime-based accounting") ?
> > >
> > > >
> > > > root@ek874:/# echo e61e0000.timer >
> > > > /sys/devices/system/clocksource/clocksource0/current_clocksource
> > > > [ 193.869423]
> > > > [ 193.870963] ============================================
> > > > [ 193.876292] WARNING: possible recursive locking detected [
> > > > 193.881625] 5.0.0-rc4-next-20190201-00007-g731346f #3 Not tainted [
> > > > 193.887737] --------------------------------------------
> > > > [ 193.893066] migration/0/11 is trying to acquire lock:
> > > > [ 193.898136] (____ptrval____) (tk_core.seq){----}, at:
> > > > update_pm_runtime_accounting+0x14/0x68
> > > > [ 193.906632]
> > > > [ 193.906632] but task is already holding lock:
> > > > [ 193.912483] (____ptrval____) (tk_core.seq){----}, at:
> > > > multi_cpu_stop+0x8c/0x140 [ 193.919828] [ 193.919828] other info
> > > > that might help us debug this:
> > > > [ 193.926377] Possible unsafe locking scenario:
> > > > [ 193.926377]
> > > > [ 193.932314] CPU0
> > > > [ 193.934765] ----
> > > > [ 193.937216] lock(tk_core.seq);
> > > > [ 193.940453] lock(tk_core.seq);
> > > > [ 193.943691]
> > > > [ 193.943691] *** DEADLOCK ***
> > > > [ 193.943691]
> > > > [ 193.949634] May be due to missing lock nesting notation [
> > > > 193.949634] [ 193.956446] 3 locks held by migration/0/11:
> > > > [ 193.960642] #0: (____ptrval____) (timekeeper_lock){-.-.}, at:
> > > > change_clocksource+0x2c/0x118 [ 193.969125] #1: (____ptrval____)
> > > > (tk_core.seq){----}, at: multi_cpu_stop+0x8c/0x140 [ 193.976903] #2:
> > > > (____ptrval____) (&(&dev->power.lock)->rlock){....}, at:
> > > > __pm_runtime_resume+0x40/0x98 [ 193.986339] [ 193.986339] stack
> > > backtrace:
> > > > [ 193.990715] CPU: 0 PID: 11 Comm: migration/0 Not tainted
> > > > 5.0.0-rc4-next-20190201-00007-g731346f #3 [ 193.999707] Hardware
> > > > name: Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875) (DT) [
> > > 194.008089] Call trace:
> > > > [ 194.010553] dump_backtrace+0x0/0x178 [ 194.014227]
> > > > show_stack+0x14/0x20 [ 194.017562] dump_stack+0xb0/0xec [
> > > > 194.020895] __lock_acquire+0xfb4/0x1c08 [ 194.024832]
> > > > lock_acquire+0xd0/0x268 [ 194.028420] ktime_get+0x5c/0x108 [
> > > > 194.031747] update_pm_runtime_accounting+0x14/0x68
> > > > [ 194.036643] rpm_resume+0x4ec/0x698 [ 194.040144]
> > > > __pm_runtime_resume+0x50/0x98 [ 194.044264]
> > > > sh_tmu_enable.part.1+0x24/0x50 [ 194.048462]
> > > > sh_tmu_clocksource_enable+0x48/0x70
> > > > [ 194.053097] change_clocksource+0x84/0x118 [ 194.057208]
> > > > multi_cpu_stop+0x8c/0x140 [ 194.060970]
> > > > cpu_stopper_thread+0xac/0x120 [ 194.065087]
> > > > smpboot_thread_fn+0x1ac/0x2c8 [ 194.069198] kthread+0x128/0x130 [
> > > > 194.072439] ret_from_fork+0x10/0x18
> > > >
> > > >
> > > > Regards,
> > > > Biju
> > > >
> > > > > -----Original Message-----
> > > > > From: Rafael J. Wysocki <rafael@kernel.org>
> > > > > Sent: 30 January 2019 21:53
> > > > > To: Vincent Guittot <vincent.guittot@linaro.org>
> > > > > Cc: Linux PM <linux-pm@vger.kernel.org>; Linux Kernel Mailing List
> > > > > <linux- kernel@vger.kernel.org>; Linux ARM <linux-arm-
> > > > > kernel@lists.infradead.org>; Linux OMAP Mailing List <linux-
> > > > > omap@vger.kernel.org>; Rafael J. Wysocki <rjw@rjwysocki.net>; Ulf
> > > > > Hansson <ulf.hansson@linaro.org>; Biju Das
> > > > > <biju.das@bp.renesas.com>; Geert Uytterhoeven
> > > > > <geert@linux-m68k.org>; Linux-Renesas <linux-
> > > > > renesas-soc@vger.kernel.org>
> > > > > Subject: Re: [PATCH v3] PM-runtime: fix deadlock with ktime
> > > > >
> > > > > On Wed, Jan 30, 2019 at 6:26 PM Vincent Guittot
> > > > > <vincent.guittot@linaro.org> wrote:
> > > > > >
> > > > > > A deadlock has been seen when swicthing clocksources which use PM
> > > > > runtime.
> > > > > > The call path is:
> > > > > > change_clocksource
> > > > > > ...
> > > > > > write_seqcount_begin
> > > > > > ...
> > > > > > timekeeping_update
> > > > > > ...
> > > > > > sh_cmt_clocksource_enable
> > > > > > ...
> > > > > > rpm_resume
> > > > > > pm_runtime_mark_last_busy
> > > > > > ktime_get
> > > > > > do
> > > > > > read_seqcount_begin
> > > > > > while read_seqcount_retry
> > > > > > ....
> > > > > > write_seqcount_end
> > > > > >
> > > > > > Although we should be safe because we haven't yet changed the
> > > > > > clocksource at that time, we can't because of seqcount protection.
> > > > > >
> > > > > > Use ktime_get_mono_fast_ns() instead which is lock safe for such
> > > > > > case
> > > > > >
> > > > > > With ktime_get_mono_fast_ns, the timestamp is not guaranteed to be
> > > > > > monotonic across an update and as a result can goes backward.
> > > > > > According to
> > > > > > update_fast_timekeeper() description: "In the worst case, this can
> > > > > > result is a slightly wrong timestamp (a few nanoseconds)". For PM
> > > > > > runtime autosuspend, this means only that the suspend decision can
> > > > > > be slightly sub optimal.
> > > > > >
> > > > > > Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using
> > > > > > hrtimers")
> > > > > > Reported-by: Biju Das <biju.das@bp.renesas.com>
> > > > > > Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> > > > > > ---
> > > > > >
> > > > > > Hi Rafael,
> > > > > >
> > > > > > Sorry, I sent the version with the typo mistake that generated the
> > > > > > compilation error reported by kbuild-test-robot
> > > > > >
> > > > > > This version doesn't have the typo.
> > > > >
> > > > > OK, I've applied this one, thanks!
> > > >
> > > >
> > > >
> > > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne
> > > End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under
> > > Registered No. 04586709.
> >
> >
> >
> > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

\
 
 \ /
  Last update: 2019-02-01 16:53    [W:0.069 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site