lkml.org 
[lkml]   [2019]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/8] drm/bridge: dw-hdmi: allow ycbcr420 modes for >= 0x200a
Date
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
for these modes in the connector if the platform supports them.
We limit these modes to DW-HDMI IP version >= 0x200a which
are designed to support HDMI2.0 display modes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
include/drm/bridge/dw_hdmi.h | 1 +
2 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 3634bbd..f1b352d 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2609,6 +2609,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
if (hdmi->phy.ops->setup_hpd)
hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);

+ if (hdmi->version >= 0x200a)
+ hdmi->connector.ycbcr_420_allowed =
+ hdmi->plat_data->ycbcr_420_allowed;
+ else
+ hdmi->connector.ycbcr_420_allowed = false;
+
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = dev;
pdevinfo.id = PLATFORM_DEVID_AUTO;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index d506df2..ede8bff 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -130,6 +130,7 @@ struct dw_hdmi_plat_data {
const struct drm_display_mode *mode);
unsigned long input_bus_format;
unsigned long input_bus_encoding;
+ bool ycbcr_420_allowed;

/* Vendor PHY support */
const struct dw_hdmi_phy_ops *phy_ops;
--
2.7.4
\
 
 \ /
  Last update: 2019-02-01 13:09    [W:0.123 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site