lkml.org 
[lkml]   [2019]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectAW: [PATCH v3 0/5] Add Oxalis board support
Hello @all,

in the meantime all interfaces are supported. Following a short overview.

> * RAM: 2GB (!) DDR3L
> * PMU: NXP VR5100
> * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card,
> * mSATA 3.0
> * Connectivity: 2x Ethernet
> * miniPCIe
> * SD Card
> * USB: 2x USB3.0
> * I2C x 2: 2x 96Boards Expansion Connector
> * UART x 2: 1 x Terminal and 1x 96Boards Expansion Connector
> * SPI: 1x 96Boards Expansion Connector
> * GPIOs

The first 96Board Community Header Board will be available in March, this is currently in production.
I will put the schematics online soon. If you have any information missing please let me know.

Best regards,
Michael

--
Tel.: +49 (0)8142/30505-0
Fax: +49 (0)8142/30505-50
Mail: m.bittner@ebs-systart.com
Internet: www.ebs-systart.com

EBS-SYSTART GmbH
Industriestraße 33a
D-82194 Gröbenzell

Amtsgericht München, HRB 70338, UST-IdNr. DE128221970
Geschäftsführer: Michael Bittner


-----Ursprüngliche Nachricht-----
Von: Manivannan Sadhasivam [mailto:manivannan.sadhasivam@linaro.org]
Gesendet: Freitag, 1. Februar 2019 04:28
An: shawnguo@kernel.org
Cc: leoyang.li@nxp.com; robh+dt@kernel.org; linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; a.tropschug@ebs-systart.com; m.bittner@ebs-systart.com; amit.kucheria@linaro.org
Betreff: Re: [PATCH v3 0/5] Add Oxalis board support

On Tue, Jan 22, 2019 at 09:51:42AM +0530, Manivannan Sadhasivam wrote:
> Hello,
>
> This patchset adds Oxalis board support. This board is one of the
> 96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some
> of the key features of this board:
>
> * SoC: NXP Layerscape LS1012A
> * RAM: 1GB DDR3L
> * PMU: NXP VR5100
> * Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA
> * Connectivity: 2x Ethernet
> * USB: 2x USB3.0
>
> More information about this board can be found in 96Boards product
> page: https://www.96boards.org/product/oxalis/
>
> Ethernet and SPI flash are not supported yet!
>
> Thanks,
> Mani
>

Hi Shawn,

Any update on this patchset?

Thanks,
Mani

> Changes in v3:
>
> * Fixed LS1012A and LS1021A bindings
> * Added missing devicetree compatibles for LS1021A based boards
> * Added Rob's Reviewed-by tag for Vendor prefix patch
>
> Changes in v2:
>
> As per Rob's review:
>
> * Adopted the Oxalis board binding to JSON format.
> * Sorted the EBS-SYSTART vendor prefix alphabetically.
> * Used the generic node name for audio codec.
>
> Manivannan Sadhasivam (5):
> dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based
> boards
> ARM: dts: Add devicetree compatibles for LS1021A based boards
> dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
> dt-bindings: arm: fsl: Add devicetree binding for Oxalis
> arm64: dts: freescale: Add devicetree for Oxalis
>
> .../devicetree/bindings/arm/fsl.yaml | 11 ++-
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 +
> arch/arm/boot/dts/ls1021a-qds.dts | 1 +
> arch/arm/boot/dts/ls1021a-twr.dts | 1 +
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++
> 7 files changed, 111 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-02-01 06:45    [W:0.082 / U:43.736 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site