lkml.org 
[lkml]   [2019]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] ARM: dts: ls1021a: define and use external interrupt lines
On Thu, Nov 14, 2019 at 12:02:51PM +0100, Rasmus Villemoes wrote:
> A device tree binding documentation as well as a driver implementing
> support for the external interrupt lines on the ls1021a has been
> merged into irqchip-next, so will very likely appear in v5.5. See
>
> 87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs
> 0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines
>
> present in next-20191114.
>
> These patches simply add the extirq node to the ls1021a.dtsi and make
> use of it on the LS1021A-TSN board. I hope these can be picked up so
> they also land in v5.5, so we don't have to wait a full extra release
> cycle.

Sorry. I usually send queued patches around -rc6 timeline to my
arm-soc maintainers. Patches coming later than that will be scheduled
for the next release unless critical fixes.
>
> v2: fix interrupt type in 2/2 (s/IRQ_TYPE_EDGE_FALLING/IRQ_TYPE_LEVEL_LOW/).
>
> Rasmus Villemoes (1):
> ARM: dts: ls1021a: add node describing external interrupt lines
>
> Vladimir Oltean (1):
> ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs

Applied both, thanks.

\
 
 \ /
  Last update: 2019-12-04 14:14    [W:1.385 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site