lkml.org 
[lkml]   [2019]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: hwmon/pmbus: Add UCD90320 power sequencer
On Fri, Nov 22, 2019 at 04:25:41PM -0600, Jim Wright wrote:
> From: Jim Wright <jlwright@us.ibm.com>
>
> Document the UCD90320 device tree binding.
>
> Signed-off-by: Jim Wright <jlwright@us.ibm.com>
> ---
> .../devicetree/bindings/hwmon/pmbus/ucd90320.txt | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt

Can you make this a schema. See
Documentation/devicetree/writing-schema.rst.

>
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> new file mode 100644
> index 000000000000..e1c1057c6292
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ucd90320.txt
> @@ -0,0 +1,13 @@
> +UCD90320 power sequencer
> +-------------------------
> +
> +Requires node properties:
> +- compatible : "ti,ucd90320"
> +- reg : the I2C address of the device. This is 0x11, 0x13, 0x17, 0x31, 0x33,
> + 0x37, 0x71, 0x73, or 0x77.
> +
> +Example:
> + ucd90320@11 {
> + compatible = "ti,ucd90320";
> + reg = <0x11>;
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-12-05 00:00    [W:0.061 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site