lkml.org 
[lkml]   [2019]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 039/209] ARM: OMAP1: fix USB configuration for device-only setups
Date
From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit c7b7b5cbd0c859b1546a5a3455d457708bdadf4c ]

Currently we do USB configuration only if the host mode (CONFIG_USB)
is enabled. But it should be done also in the case of device-only setups,
so change the condition to CONFIG_USB_SUPPORT. This allows to use
omap_udc on Palm Tungsten E.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap1/Makefile | 2 +-
arch/arm/mach-omap1/include/mach/usb.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index e8ccf51c6f292..ec0235899de20 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -25,7 +25,7 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)

led-y := leds.o

-usb-fs-$(CONFIG_USB) := usb.o
+usb-fs-$(CONFIG_USB_SUPPORT) := usb.o
obj-y += $(usb-fs-m) $(usb-fs-y)

# Specific board support
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 77867778d4ec7..5429d86c7190d 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -11,7 +11,7 @@

#include <linux/platform_data/usb-omap1.h>

-#if IS_ENABLED(CONFIG_USB)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
void omap1_usb_init(struct omap_usb_config *pdata);
#else
static inline void omap1_usb_init(struct omap_usb_config *pdata)
--
2.20.1


\
 
 \ /
  Last update: 2019-12-04 19:24    [W:1.223 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site