lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] gpio: bcm-kona: use platform_irq_count
Date
From: Peng Fan <peng.fan@nxp.com>

Use platform_irq_count to replace of_irq_count

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V1:
Code inspection, not tested

drivers/gpio/gpio-bcm-kona.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 4122683eb1f9..c50721980a7c 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -19,7 +19,6 @@
#include <linux/io.h>
#include <linux/gpio/driver.h>
#include <linux/of_device.h>
-#include <linux/of_irq.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
@@ -586,7 +585,7 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)

kona_gpio->gpio_chip = template_chip;
chip = &kona_gpio->gpio_chip;
- kona_gpio->num_bank = of_irq_count(dev->of_node);
+ kona_gpio->num_bank = platform_irq_count(pdev);
if (kona_gpio->num_bank == 0) {
dev_err(dev, "Couldn't determine # GPIO banks\n");
return -ENOENT;
--
2.16.4
\
 
 \ /
  Last update: 2019-12-03 07:04    [W:0.040 / U:27.844 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site