lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] gpio: mvebu: use platform_irq_count
Date
From: Peng Fan <peng.fan@nxp.com>

Use platform_irq_count to replace of_irq_count

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V1:
Code inspection, not tested

drivers/gpio/gpio-mvebu.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 993bbeb3c006..ecfedcdadc0d 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -46,7 +46,6 @@
#include <linux/irqdomain.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
-#include <linux/of_irq.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
@@ -1102,7 +1101,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;

/* Some gpio controllers do not provide irq support */
- have_irqs = of_irq_count(np) != 0;
+ have_irqs = platform_irq_count(pdev) != 0;

mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip),
GFP_KERNEL);
--
2.16.4
\
 
 \ /
  Last update: 2019-12-03 07:04    [W:0.041 / U:2.748 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site