lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: spi-nor: Fix the write Status Register on micron flashes
Date
From: Tudor Ambarus <tudor.ambarus@microchip.com>

Micron flashes do not support 16 bit writes on the Status Register.
According to micron datasheets, when using the Write Status Register
(01h) command, the chip select should be driven LOW and held LOW until
the eighth bit of the last data byte has been latched in, after which
it must be driven HIGH. If CS is not driven HIGH, the command is not
executed, flag status register error bits are not set, and the write enable
latch remains set to 1. This fixes the lock operations on micron flashes.

Reported-by: John Garry <john.garry@huawei.com>
Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/mtd/spi-nor/spi-nor.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f1490c7b5cb9..7e41493f69d8 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -4607,6 +4607,7 @@ static void sst_set_default_init(struct spi_nor *nor)
static void st_micron_set_default_init(struct spi_nor *nor)
{
nor->flags |= SNOR_F_HAS_LOCK;
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
nor->params.quad_enable = NULL;
nor->params.set_4byte = st_micron_set_4byte;
}
--
2.14.5
\
 
 \ /
  Last update: 2019-12-03 15:17    [W:0.034 / U:4.464 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site