lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/14] ARM: dts: ibm-power9-dual: Add a unit address for OCC nodes
Date
These temporarily have a unit address until userspace is fixed up as
noted in comments elsewhere in the dtsi.

Fixes the following warning:

arch/arm/boot/dts/ibm-power9-dual.dtsi:89.18-91.6: Warning (unit_address_vs_reg): /gpio-fsi/cfam@0,0/sbefifo@2400/occ: node has a reg or ranges property, but no unit name
arch/arm/boot/dts/ibm-power9-dual.dtsi:190.18-192.6: Warning (unit_address_vs_reg): /gpio-fsi/cfam@0,0/hub@3400/cfam@1,0/sbefifo@2400/occ: node has a reg or ranges property, but no unit name

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/ibm-power9-dual.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
index 2abc42eda7b0..a0fa65b44b0f 100644
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi
@@ -86,7 +86,7 @@
#address-cells = <1>;
#size-cells = <0>;

- fsi_occ0: occ {
+ fsi_occ0: occ@1 {
compatible = "ibm,p9-occ";
};
};
@@ -187,7 +187,7 @@
#address-cells = <1>;
#size-cells = <0>;

- fsi_occ1: occ {
+ fsi_occ1: occ@2 {
compatible = "ibm,p9-occ";
};
};
--
git-series 0.9.1
\
 
 \ /
  Last update: 2019-12-03 13:03    [W:0.051 / U:30.488 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site