lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/14] ARM: dts: aspeed-g5: Move EDAC node to APB
Date
Previously the register interface was not attached to any internal bus,
which is not correct - it lives on the APB.

Cc: Stefan M Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index a8ce59a3c88d..edad1fd78925 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
reg = <0x80000000 0>;
};

- edac: sdram@1e6e0000 {
- compatible = "aspeed,ast2500-sdram-edac";
- reg = <0x1e6e0000 0x174>;
- interrupts = <0>;
- status = "disabled";
- };
-
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -213,6 +206,13 @@
#size-cells = <1>;
ranges;

+ edac: sdram@1e6e0000 {
+ compatible = "aspeed,ast2500-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
syscon: syscon@1e6e2000 {
compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
--
git-series 0.9.1
\
 
 \ /
  Last update: 2019-12-03 13:03    [W:0.093 / U:28.096 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site