lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-bindings: usb: add "hub,interval" property
Date
Add "hub,interval" property to usb-device, so hub device can override
endpoint descriptor's bInterval.

When we know reducing autosuspend delay for built-in HIDs is better for
power saving, we can reduce it to the optimal value. But if a parent hub
has a long bInterval, mouse lags a lot from more frequent autosuspend.
So this enables overriding bInterval for a hard wired hub device only
when we know that reduces the power consumption.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
---
Documentation/devicetree/bindings/usb/usb-device.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 036be172b1ae..44bef2ff2704 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -66,6 +66,9 @@ Required properties for host-controller nodes with device nodes:
- #size-cells: shall be 0


+Optional properties for hub nodes
+- hub,interval: bInterval of status change endpoint. The range is 1-255.
+
Example:

&usb1 { /* host controller */
@@ -75,6 +78,7 @@ Example:
hub@1 { /* hub connected to port 1 */
compatible = "usb5e3,608";
reg = <1>;
+ hub,interval = <8>;
};

device@2 { /* device connected to port 2 */
--
2.24.0.393.g34dc348eaf-goog
\
 
 \ /
  Last update: 2019-12-03 11:16    [W:0.023 / U:10.484 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site