lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] media: i2c: imx290: Add RAW12 mode support
Hi Manivannan,

On Sat, Nov 30, 2019 at 12:35:39AM +0530, Manivannan Sadhasivam wrote:
> IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
> 12 bit formats. Since the driver already supports RAW10 mode, let's add
> the missing RAW12 mode as well.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/media/i2c/imx290.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index e218c959a729..d5bb3a59ac46 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -75,6 +75,7 @@ struct imx290 {
> struct clk *xclk;
> struct regmap *regmap;
> int nlanes;
> + u8 bpp;
>
> struct v4l2_subdev sd;
> struct v4l2_fwnode_endpoint ep;
> @@ -98,6 +99,7 @@ struct imx290_pixfmt {
>
> static const struct imx290_pixfmt imx290_formats[] = {
> { MEDIA_BUS_FMT_SRGGB10_1X10 },
> + { MEDIA_BUS_FMT_SRGGB12_1X12 },
> };
>
> static const struct regmap_config imx290_regmap_config = {
> @@ -265,6 +267,18 @@ static const struct imx290_regval imx290_10bit_settings[] = {
> { 0x300b, 0x00},
> };
>
> +static const struct imx290_regval imx290_12bit_settings[] = {
> + { 0x3005, 0x01 },
> + { 0x3046, 0x01 },
> + { 0x3129, 0x00 },
> + { 0x317c, 0x00 },
> + { 0x31ec, 0x0e },
> + { 0x3441, 0x0c },
> + { 0x3442, 0x0c },
> + { 0x300a, 0xf0 },
> + { 0x300b, 0x00 },
> +};
> +
> /* supported link frequencies */
> static const s64 imx290_link_freq[] = {
> IMX290_DEFAULT_LINK_FREQ,
> @@ -550,6 +564,21 @@ static int imx290_write_current_format(struct imx290 *imx290,
> dev_err(imx290->dev, "Could not set format registers\n");
> return ret;
> }
> +
> + imx290->bpp = 10;
> +
> + break;
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + ret = imx290_set_register_array(imx290, imx290_12bit_settings,
> + ARRAY_SIZE(
> + imx290_12bit_settings));
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set format registers\n");
> + return ret;
> + }
> +
> + imx290->bpp = 12;
> +
> break;
> default:
> dev_err(imx290->dev, "Unknown pixel format\n");
> @@ -910,6 +939,9 @@ static int imx290_probe(struct i2c_client *client)
> goto free_err;
> }
>
> + /* Default bits per pixel value */
> + imx290->bpp = 10;

Where is the format being initialised at the moment? Nowhere?

If that is the case, I think it should be fixed before this patch.

> +
> mutex_init(&imx290->lock);
>
> v4l2_ctrl_handler_init(&imx290->ctrls, 4);

--
Kind regards,

Sakari Ailus

\
 
 \ /
  Last update: 2019-12-03 09:55    [W:0.046 / U:6.812 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site