lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] media: i2c: imx290: Add support for test pattern generation
Hi Manivannan,

On Sat, Nov 30, 2019 at 12:35:38AM +0530, Manivannan Sadhasivam wrote:
> Add support for generating following test patterns by IMX290:
>
> * Sequence Pattern 1
> * Horizontal Color-bar Chart
> * Vertical Color-bar Chart
> * Sequence Pattern 2
> * Gradation Pattern 1
> * Gradation Pattern 2
> * 000/555h Toggle Pattern
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/media/i2c/imx290.c | 41 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index 1d49910937fb..e218c959a729 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -26,12 +26,19 @@
> #define IMX290_REGHOLD 0x3001
> #define IMX290_XMSTA 0x3002
> #define IMX290_FR_FDG_SEL 0x3009
> +#define IMX290_BLKLEVEL_LOW 0x300a
> +#define IMX290_BLKLEVEL_HIGH 0x300b
> #define IMX290_GAIN 0x3014
> #define IMX290_HMAX_LOW 0x301c
> #define IMX290_HMAX_HIGH 0x301d
> +#define IMX290_PGCTRL 0x308c
> #define IMX290_PHY_LANE_NUM 0x3407
> #define IMX290_CSI_LANE_MODE 0x3443
>
> +#define IMX290_PGCTRL_REGEN BIT(0)
> +#define IMX290_PGCTRL_THRU BIT(1)
> +#define IMX290_PGCTRL_MODE(n) ((n) << 4)
> +
> /* HMAX fields */
> #define IMX290_HMAX_2_1920 0x1130
> #define IMX290_HMAX_4_1920 0x0898
> @@ -99,6 +106,17 @@ static const struct regmap_config imx290_regmap_config = {
> .cache_type = REGCACHE_RBTREE,
> };
>
> +static const char * const imx290_test_pattern_menu[] = {
> + "Disabled",
> + "Sequence Pattern 1",
> + "Horizontal Color-bar Chart",
> + "Vertical Color-bar Chart",
> + "Sequence Pattern 2",
> + "Gradation Pattern 1",
> + "Gradation Pattern 2",
> + "000/555h Toggle Pattern",
> +};
> +
> static const struct imx290_regval imx290_global_init_settings[] = {
> { 0x3007, 0x00 },
> { 0x3018, 0x65 },
> @@ -394,6 +412,22 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> case V4L2_CID_GAIN:
> ret = imx290_set_gain(imx290, ctrl->val);
> break;
> + case V4L2_CID_TEST_PATTERN:
> + if (ctrl->val) {
> + imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00);
> + imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00);
> + mdelay(10);

Any particular reason for a busy loop instead of sleeping? Same below.

> + imx290_write_reg(imx290, IMX290_PGCTRL,
> + (u8)(IMX290_PGCTRL_REGEN |
> + IMX290_PGCTRL_THRU |
> + IMX290_PGCTRL_MODE(ctrl->val)));
> + } else {
> + imx290_write_reg(imx290, IMX290_PGCTRL, 0x00);
> + mdelay(10);
> + imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x3c);
> + imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00);
> + }
> + break;
> default:
> ret = -EINVAL;
> break;
> @@ -878,7 +912,7 @@ static int imx290_probe(struct i2c_client *client)
>
> mutex_init(&imx290->lock);
>
> - v4l2_ctrl_handler_init(&imx290->ctrls, 3);
> + v4l2_ctrl_handler_init(&imx290->ctrls, 4);
>
> v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> V4L2_CID_GAIN, 0, 72, 1, 0);
> @@ -896,6 +930,11 @@ static int imx290_probe(struct i2c_client *client)
> INT_MAX, 1,
> imx290_modes[0].pixel_rate);
>
> + v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops,
> + V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> + 0, 0, imx290_test_pattern_menu);
> +
> imx290->sd.ctrl_handler = &imx290->ctrls;
>
> if (imx290->ctrls.error) {

--
Sakari Ailus

\
 
 \ /
  Last update: 2019-12-03 09:50    [W:0.062 / U:2.340 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site