lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] gpio: mvebu: use platform_irq_count
Date
From: Peng Fan <peng.fan@nxp.com>

platform_irq_count() is the more generic way (independent of
device trees) to determine the count of available interrupts. So
use this instead.

As platform_irq_count() might return an error code (which
of_irq_count doesn't) some additional handling is necessary.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

V2:
Update commit log, add err handling
Not tested, just code inspection

drivers/gpio/gpio-mvebu.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 993bbeb3c006..f0fd82b3417c 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -46,7 +46,6 @@
#include <linux/irqdomain.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
-#include <linux/of_irq.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
@@ -1102,7 +1101,11 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;

/* Some gpio controllers do not provide irq support */
- have_irqs = of_irq_count(np) != 0;
+ err = platform_irq_count(pdev);
+ if (err < 0)
+ return err;
+
+ have_irqs = err != 0;

mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip),
GFP_KERNEL);
--
2.16.4
\
 
 \ /
  Last update: 2019-12-04 05:21    [W:0.097 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site