lkml.org 
[lkml]   [2019]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] gpio: bcm-kona: use platform_irq_count
Date
> Subject: Re: [PATCH 2/2] gpio: bcm-kona: use platform_irq_count
>
> On Tue, Dec 03, 2019 at 07:00:40AM +0000, Peng Fan wrote:
> > > Subject: Re: [PATCH 2/2] gpio: bcm-kona: use platform_irq_count
> > >
> > > On Tue, Dec 03, 2019 at 06:04:27AM +0000, Peng Fan wrote:
> > > > From: Peng Fan <peng.fan@nxp.com>
> > > >
> > > > Use platform_irq_count to replace of_irq_count
> > > >
> > > > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > > > ---
> > > >
> > > > V1:
> > > > Code inspection, not tested
> > > >
> > > > drivers/gpio/gpio-bcm-kona.c | 3 +--
> > > > 1 file changed, 1 insertion(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/gpio/gpio-bcm-kona.c
> > > > b/drivers/gpio/gpio-bcm-kona.c index 4122683eb1f9..c50721980a7c
> > > 100644
> > > > --- a/drivers/gpio/gpio-bcm-kona.c
> > > > +++ b/drivers/gpio/gpio-bcm-kona.c
> > > > @@ -19,7 +19,6 @@
> > > > #include <linux/io.h>
> > > > #include <linux/gpio/driver.h>
> > > > #include <linux/of_device.h>
> > > > -#include <linux/of_irq.h>
> > > > #include <linux/init.h>
> > > > #include <linux/irqdomain.h>
> > > > #include <linux/irqchip/chained_irq.h> @@ -586,7 +585,7 @@ static
> > > > int bcm_kona_gpio_probe(struct platform_device *pdev)
> > > >
> > > > kona_gpio->gpio_chip = template_chip;
> > > > chip = &kona_gpio->gpio_chip;
> > > > - kona_gpio->num_bank = of_irq_count(dev->of_node);
> > > > + kona_gpio->num_bank = platform_irq_count(pdev);
> > >
> > > of_irq_count returns 0 or a positive int while platform_irq_count
> > > might return a negative error code. This needs handling. Also I
> > > wonder why
> > > platform_irq_count() is better than of_irq_count() which would be
> > > good to describe in the commit log.
> >
> > Inspired from
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml
> > .org%2Flkml%2F2015%2F11%2F18%2F466&amp;data=02%7C01%7Cpeng.f
> an%40nxp.c
> >
> om%7C46364bf12479463df7d308d777c09b39%7C686ea1d3bc2b4c6fa92cd9
> 9c5c3016
> >
> 35%7C0%7C0%7C637109541440912984&amp;sdata=awTvwwmo4692Hx7IJ
> H%2BllEVJH7
> > ngINufoMH8UsosU%2BA%3D&amp;reserved=0
> > From Rob:
> > "
> > So I started looking at why you are using of_irq_count which drivers
> > shouldn't need to. In patch 5 you use it to allocate memory to store
> > the irq names, then use them here...
> > "
> >
> > Is this ok?
>
> I would say something like:
>
> platform_irq_count() is the more generic way (independent of
> device trees) to determine the count of available interrupts. So
> use this instead.
>
> As platform_irq_count() might return an error code (which
> of_irq_count doesn't) some additional handling is necessary.

Thanks, how about this change?
@@ -586,11 +585,15 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)

kona_gpio->gpio_chip = template_chip;
chip = &kona_gpio->gpio_chip;
- kona_gpio->num_bank = of_irq_count(dev->of_node);
- if (kona_gpio->num_bank == 0) {
+ ret = platform_irq_count(pdev);
+ if (!ret) {
dev_err(dev, "Couldn't determine # GPIO banks\n");
return -ENOENT;
+ } else if (ret < 0) {
+ return ret;
}
+ kona_gpio->num_bank = ret;
+
if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {

Thanks,
Peng.
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K. | Uwe Kleine-König
> |
> Industrial Linux Solutions |
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
> pengutronix.de%2F&amp;data=02%7C01%7Cpeng.fan%40nxp.com%7C46364
> bf12479463df7d308d777c09b39%7C686ea1d3bc2b4c6fa92cd99c5c301635%
> 7C0%7C0%7C637109541440922981&amp;sdata=8zAFDgy56%2BjS4I4dUvB6
> y37AMHBu1PDdzESa6c2jUlc%3D&amp;reserved=0 |

\
 
 \ /
  Last update: 2019-12-03 08:24    [W:0.065 / U:9.988 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site